×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
Pressure bar in draw frame is used to
2.
Yarn tension during winding is proportional to the
3.
A 3.5 crossing drum means there are
4.
A loom is weaving the design of 1 up 2 down twill. If the loom is running at 240 rpm, the speed of tappet shaft will be
5.
A Jacquard design is repeating on 20 cm along length and 12 cm along width. If the fabric has 30 ends and 24 picks per cm, the Jacquard capacity is
6.
A loom of 500 cm width is running at 800 picks/min. The weft insertion rate of the loom is
7.
On a Sulzer
8.
Which one of the following phenomena cannot be described by Poisson distribution
9.
If 1 Km of yarn produces 900 m fabric, the yarn crimp in the fabric is
10.
Indigo is a