Riverbed Certified Solutions Professional - Network Performance Management Set 9

Question - 11 Maximum mark : - 22

Home
All Exams
Riverbed Certified Solutions Professional - Network Performance Management Online Mock Tests
Riverbed Certified Solutions Professional - Network Performance Management Set 9

How do Cascade Performance Analytics assist with Performance Monitoring?

By setting intelligent static thresholds for Application metrics and Interface metrics, tolerance can be
determined. Cascade will use these thresholds and tolerances to report on deviations indicative of
performance problems. ✘ The Customer only needs to identify their critical hosts, interfaces and/or applications, and Cascade willautomatically baseline their behavior and report on deviations indicative of performance problems. ✘ The Performance Analytics use knowledge of hosts, interfaces, and/or applications are able to detectsecurity threats such as host scans and worms. ✘ After baselining is completed, Cascade can re-route congested traffic to avoid congested applicationdelivery paths. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

When editing a previously configured service policy, what options become available if you click the 'show advanced settings' checkbox? (Select 3)

Allows enabling/disabling the detection of dips in the metric. Allows tuning of the tolerance range of the metric. Allows setting of a noise floor for the metric. Allows adjusting the notifications for the metric. Allows enabling/disabling the detection of spikes in the metric.

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

What is the minimum number of physical appliances required when building Cascade solution that will collect and process 3.6 million unique (de-duplicated) flows/minute from NetFlow sources?

11 for the Cascade Profiler, 3 Cascade Gateways ✘ 10 for the Cascade Profiler, 3 Cascade Gateways ✘ 11 for the Cascade Profiler, 5 Cascade Gateways ✘ 10 for the Cascade Profiler, 5 Cascade Gateways ✔ 12 for the Cascade Profiler, 4 Cascade Gateways ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

The default group type for all Security Policies is:

Application_Servers ✘ ByFunction ✘ ByLocation ✘ Automatic ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

What do you need to configure on the Profiler to detect utilization for an interface?

You have to manually configure the interface speeds on the Devices/Interfaces page. ✘ You have to configure SNMP access to the reporting devices on the Devices/Interfaces page. ✘ One of either A or B above. ✘ None of the above; Cascade will figure this out automatically. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Is there a way to look at who owns the Domain for an external IP Address shown in the Cascade Profiler GUI?

No. ✘ Yes, you can do this with the ARIN lookup in external links. The customer can also add additionalexternal links if they have other sites they use to look up IP Addresses. ✘ This is available as a column in any report that displays the IP Address. ✘ This is available under IP Host Group Type. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

In order to create an interactive view on Cascade Pilot:

Select two views from the views panel using control-click then right click on one and select Create
Interactive View from the drop-down menu. ✘ After a Drill-Down from one view to another, right click on the Drill-Down view in the sources panel andselect "Create Interactive View" from the drop-down menu. ✘ Select any item (such as a host IP Address, Port or Protocol name) in the main workspace and rightclick on the item, then select Create Interactive View from the drop-down menu. ✘ Select any view in the views panel, right-click it and select Create Interactive View from the drop-downmenu. ✔ Open the filters panel, apply an existing or new filter to the view then select save as interactive view from the home menu. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

On Cascade Profiler, what does "tunneled" indicate when used as a keyword for an Application?

When the traffic flow matches more than one Application signature. This indicates that the one
Application may have been tunneled over the other. ✘ When an Application runs over a non-standard port (such as TELNET traffic on Port 80). ✘ When a port definition is non-standard (e.g. when you change tcp/80's definition from http to telnet). ✘ When a Layer-4 Application Mapping is defined. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Assume five different devices reported the same flow/conversation to the Cascade Profiler two Riverbed Steelheads, two routers, and a Cascade Sensor in the data center. For a query that looks only for all traffic between the client and server (i.e., no devices or interfaces were specified on the query), what bandwidth and packet values will be reported?

The smallest bandwidth and packet count recorded by the five devices. ✘ The largest bandwidth and packet counts recorded by one of the interfaces on one of the five devices. ✘ The mean bandwidth and packet count recorded by the five devices. ✘ The highest LAN packet count recorded by either Steelhead. ✔ None of the above the flow records store only the first byte and packet count reported by any of thereporting devices. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

10.

Trace clips that no longer have data because their packet data and trend data is no longer available in the parent capture job trace:

Appear with a red lightning bolt icon within Cascade Pilot. ✘ Appear with a lock icon within Cascade Pilot. ✘ Appear with a grey lightning bolt icon within Cascade Pilot. ✘ Appear with a yellow lightning bolt icon within Cascade Pilot. ✔ Appear with the trace clip name in red text within Cascade Pilot. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Prev Next

Congratulations

you have successfully completed the test

Back to Question View Result

Detail Form

We will send your result on your email id and phone no. please fill detail

Name

Email ID Note: Report will be send to the above Email ID

Phone No

Riverbed Certified Solutions Professional - Network Performance Management Set 9

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner