Power Electronics Set 3

Common Base ✘ Common Collector ✘ Common Emitter ✘ None of these ✔

The charge is removed by applying reverse anode-cathode voltage ✘ Chargers are injected by applying reverse anode-cathode voltage ✘ Chargers are injected by applying the gate signal ✘ None of these ✔

Inductor ✘ Transistor ✘ Capacitor ✘ None of these ✔

The forward anode voltage is increased from 10% to 90% & the anode current decreases from 90% to 10% of the initial value ✘ The forward anode voltage is decreased from 90% to 10% & the anode current decreases from 90% to 10% of the initial value ✘ The forward anode voltage is decreased from 90% to 10% & the anode current increases from 10% to 90% of the initial value ✘ The forward anode voltage is increased from 10% to 90% & the anode current also increases from 10% to 90% of the initial value ✔

Decrease with the decrease in the RMS value if forward anode-cathode voltage ✘ Decrease with the increase in the junction temperature ✘ Increase with an increase in the junction temperature ✘ Increase with the decrease in the RMS value of forward anode-cathode voltage ✔

Bisecting the SCR vertically ✘ Bisecting the SCRs middle two layer ✘ Bisecting the SCR horizontally ✘
Bisecting the SCRs top two and bottom two layers ✔

Gate Triggering Method ✘ Forward Voltage Triggering Method ✘ Temperature Triggering Method ✘ dv/dt triggering Method ✔

Ohmic region ✘ Cut-off region ✘ Saturation region ✘ Active region ✔