Oracle StorageTek Tape Libraries Essentials Set 1

Both stopped ✘ ACSLS down, database up ✘ ACSLS up, database down ✘ Both running ✔

LTO1, LTO2, LTO3, LTO4, and LTO5 ✘ LTO2, LTO3, LTO4, and LTO5 ✘ LTO3, LTO4, and LTO5 ✘ LTO4 and LTO5 ✔

Redundant Power and Hot-Swappable Drives ✘ Redundant CAPs and Hot Swappable Control Cards ✘ Hot Swappable Redundant Robotics and Control Cards ✘ Hot Swappable Drives and Redundant CAPs ✔ Redundant Robotics and Hot Swappable Drives ✔

To assign multiple drives to a logical library, the drives must be located in the same ACS. ✘ Drives may be shared across multiple logical libraries. ✘ Both LTO and Enterprise drives may be configured into logical libraries. ✘ Drives may only be added to logical libraries through the ACSLS GUI. ✔

Log in as acssa, issue a "query vol all", and then a "grep WHY100-299" ✘ Log in as acssa, issue a "volrpt zs", and then a "grep why1" ✘ Log in as acssa, enter a "volrpt v why", qand then a "grep WHY100-WHY299" ✘ Log in as acssa and issue a "volrpt-v WHY100-WHY299" ✔

Define pool 5, set scratch on, and then set clean for volume range ✘ Define pool 5, set scratch off, and then set clean for volume range ✘ Define pool 5 and set clean for volume range ✘ Can't define clean tapes to a specific pool ✔

Base CEM CEM CEM ✘ CEM CEM CEM Base ✘ CEM DEM Base CEM ✘ CEM DEM CEM ✔

Query LSM 0 drive all ✘ Query drive all ✘ show drive all ✘ Display drive all LSM 0 ✔

Only at the initial hardware install ✘ Only through the Command Proc ✘ Through the Command Proc and the ACSLS GUI ✘ Only through the ACSLS GUI ✔

Log in to the SLC and go to Tools > Reports > Versions > Software Versions

✘

Log in to the SLC and go to Tools > Hardware Activation > Install Hardware Activation Key

✘

Log in to the SLC and go to Hardware Activation > Install Hardware Activation Keys

✘

Log in to the SLC and go to Maintenance > Install Hardware Activation Keys

✔