Oracle Solaris 10 Certified Professional

Question - 25 Maximum mark : - 45

Home
All Exams
Oracle Solaris 10 Certified Professional Online Mock Tests
Oracle Solaris 10 Certified Professional

You must add additional network ports to your SPARC-based workstation. You have a Quad Fast Ethernet card. The system is currently powered off for scheduled maintenance. Which steps make the card accessible by the operating system?

remove the system cover; install the qfe card in an available SBus slot; power on the system; log in to the system as root; verify the card is working by running the rup command ✘ remove the system cover; install the qfe card in an available PCI slot; power on the system; login to the system as root; verify the card is working by running the ping command ✘ remove the system cover; install the qfe card in an available PCI slot; power on the system;when you see the banner displayed, press the Stop-a key combination; execute the boot -rv PROM command at the ok prompt and look for references to qfe in the boot messages ✘ remove the system cover; install the qfe card in an available PCI slot; power on the system; login to the system as a general user; verify the card is working by running the rup command ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Your x86-based system is running the Solaris 10 OS. You need to boot into single-user mode to carry out system maintenance. What should you do to get the system to boot directly into single user mode?

when the Current Boot Parameters menu appears, type boot -s ✘ when the Current Boot Parameters menu appears, type b -s ✘ when the Boot Interpreter Menu appears, type init -s ✘ reboot the system from the DCA diskette ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Your x86-based system with Solaris 10 OS installed on it is not booting correctly. You think the problem might be that a BIOS setting is not correctly configured. What should you do to abort the boot process and reboot into the BIOS configuration menu?

You press the Stop-A keys then type reset-all. You reboot directly into the BIOS configuration menu and examine the BIOS settings. ✘ You press the Ctrl-Alt-Del keys and reboot the system, or press the reset button. When the screen tells indicates the key to enter the BIOS, you press it andexamine your BIOS settings. ✘ You press the middle mouse button. When the screen times out, you enter the BIOS configuration menu and examine the BIOS settings. ✘ While holding down the reset button, you power cycle the system. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

A full backup of the file system mounted on /export/home has been created. As root, an interactive restore of the /export/home/usercb/.profile file with the /var/tmp directory as the current working directory is being performed. The end of the restore asks "set owner/mode for '.'? [yn]", and answer y is selected to set the modes accordingly. What is the result of this action?

The owner and mode of /export/home are set equal to the owner and mode of /export/home before the backup (as stored on tape). ✘ The owner and mode of /var/tmp are set equal to the owner and mode of /export/home before the backup (as stored on tape). ✘ The owner and mode of /export/home stored on the backup tape are updated with the current owner and mode values of /export/home. ✘ The owner and mode of /var/tmp/usercb are set equal to the current owner and mode of /export/home/usercb. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

An x86-based laptop has just had Solaris 10 OS installed. The graphics configuration has NOT been automatically detected and it is running without graphics. Which program can you run to create an Xsun configuration file?

/usr/X11/bin/xorgconfig ✘ /usr/dt/bin/Xsession ✘ /usr/X11/bin/Xserver ✘ /usr/openwin/bin/kdmconfig ✔ /usr/X11/bin/Xorg -configure ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

You need to convert the Sun VTS software package from the file system format to the data stream format to propagate the software using your WANboot server. The package is currently in the /var/tmp directory. Which command do you need to execute to accomplish this task?

# pkgtrans /var/tmp /tmp/SUNWvts.pkg SUNWvts ✘ # pkgconvert -f /var/tmp/SUNWvts -d /var/tmp/SUNWvts.pkg ✘ # pkgstream SUNWvts /var/tmp/SUNWvts.datastream ✘ # pkgstream /var/tmp/SUNWvts /tmp/SUNWvts.stream ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which three are required system hardware requirements to install the Entire Solaris software group plus Original Equipment Manufacturers (OEM) support cluster using the GUI installation Method?

256 megabytes of memory OpenBoot PROM firmware version 4.14 or later 5 gigabytes of disk space 128 megabytes of memory access to a CD-ROM/DVD drive or an installation server

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

/usr/X11/bin/Xserver ✘ /usr/openwin/bin/kdmconfig ✘ /usr/X11/bin/xorgconfig ✘ /usr/X11/bin/Xorg -configure ✔ /usr/dt/bin/Xsession ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Every user's home directory is located in the /export/home file system as /export/home/ . The output from df -h shows the user's home file system filling up: Filesystem size used avail capacity Mounted on /dev/dsk/c0t0d0s5 7.9G 7.5G 0.4G 95% /export/home Which command displays disk usage by user?

ls -lR /export/home ✘ du -sh /export/home/* ✘ df -k /export/home/* ✘ du -h /export/home ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

10.

You need to set up a cron job that will run the /usr/bin/banner command to display the message System Backups tonight in a console window at 5:00 p.m. each Thursday. Which is the correct cron table entry?

0 17 * * 4 /usr/bin/banner "System Backups tonight" > /dev/console ✘ 0 5 * * 5 /usr/bin/banner "System Backups tonight" > /dev/console ✘ 0 5 * * 4 /usr/bin/banner "System Backups tonight" > /dev/console ✘ 0 17 * * 5 /usr/bin/banner "System Backups tonight" > /dev/console ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Prev Next

Congratulations

you have successfully completed the test

Back to Question View Result

Detail Form

We will send your result on your email id and phone no. please fill detail

Name

Email ID Note: Report will be send to the above Email ID

Phone No

Oracle Solaris 10 Certified Professional

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner