×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
You are planning a migration from a 7-mode system running DATA ONTAP 8.0 to a new AFF A700 ONTAP 9.1 system. This 7-mode system provides only iSCSI LUNs for a windows server 2012R2 server farm. There is no FC fabric available for this migration. In this scenario, what would you use for the migration?
2.
You recently configured your SVM to serve data with the FC protocol by issuing the following commands: Vserver fcp create -vserver vs1 -status-admin up Network interface create -vserver vs1 -lif lif1 -role-data -data-protocol fcp -home-node node_name -home-port port However, your LIF still shows an operational status of down. What must you do to change the operational status to up?
3.
A customer has four SVMs on a 4-node cluster. Each SVM has two FC LIFs per node, for a total of eight LIFs per node. According to Netapp Best practices, what is the minimum number of ports required per node for this configuration?
4.
You have 4-node cluster with a FAS8200 HA pair and AFF A700 HA PAIR. You need to move a LUN from the FAS8200 to the AFF A700 for faster performance. In this scenario, which sequence of steps, accomplishes task nondisruptively?
5.
A storage administrator has created LUNs for FC access. What must each LUN have configured to allow access?
6.
A customer has 1 TB volume with space guarantee set to volume. Two 100 GBs LUNs are created in the volume with LUN reservation enabled and no snapshot copies exist. In this scenario, how much space will be shown as used in the volume?
7.
You are planning to expand an existing SAN only cluster consisting of eight AFF A700 nodes. In this scenario, that is the maximum number of additional AFF A700 nodes allowed for your cluster?
8.
Which NetApp resource would you use to validate the maximum number of FC hops that are supported by a switch vendor?
9.
You need to determine the maximum LUN size per host operating system. Which resource has this information?
10.
A 4-node cluster is upgraded from clustered Data ONTAP 8.2 to ONTAP 9.1. LUNs that were created after the upgrade are visible only on the target ports of the node that owns the LUN and its HA partner. LUNs that were on the system before the upgrade are visible on all target ports. You want all LUNs to have paths only to the owning HA pair. In this scenario, which non-disruptive action would accomplish this task?