Microsoft-TS Microsoft Lync Server 2010, Configuring Set 1

Your network has Lync Server 2010 deployed. You configure Call Admission Control. You need to enable Call Admission Control. Which cmdlet should you run?

Your network has a Lync Server 2010 infrastructure that has a bandwidth policy. You need to override the bandwidth policy for a user named User1. What should you do first?

Your network has Lync Server 2010 deployed. You need to ensure that when users on the PSTN receive calls from users in your organization, the calls display the telephone number +14255551212. What should you do?

Your network has a Lync Server 2010 infrastructure that contains three servers. The servers are configured as shown in the following table. Server2 and Server3 are in a Mediation pool. You plan to temporarily remove Server2 from the network. You need to prevent new voice calls from being routed to Server2. The solution must not disconnect calls in progress. What should you do?

Your network has Lync Server 2010 deployed. You deploy dial-in conferencing. You need to provide the dial-in conferencing information to all the users on the network. What should you run?

Your network has a Lync Server 2010 infrastructure that uses Enterprise Voice. You need to enable call park for Enterprise Voice users. You configure a call park number range. What should you do next?

You deploy a Lync Server 2010 pool and a hardware load balancer. You plan to provide load balancing for dial-in conferencing. You need to identify which TCP ports must be redirected on the hardware load balancer. Which TCP ports should you identify?

Your company has a country code of 1 and an area code of 425. The network has a Lync Server 2010 infrastructure that uses Enterprise Voice. You plan to create a normalization rule to normalize seven-digit numbers to E.164 format. You need to identify the appropriate translation rule for the normalization rule. Which translation rule should you identify?

Your network has Lync Server 2010 deployed. You deploy a Mediation Server, and then you configure a voice route that uses a SIP trunk. You create a test user named User1. You enable Enterprise Voice for User1. You need to verify that when User1 initiates calls to external telephone numbers, the calls are routed through the SIP trunk. What should you run?

Your network has Lync Server 2010 deployed. The network contains a server that runs Microsoft Exchange Server 2010. The server has the Unified Messaging server role deployed. You need to ensure that the voice mail of all Enterprise Voice users is stored in their Exchange mailboxes. You enable Unified Messaging (UM) for all Exchange mailbox-enabled users and create a UM dial plan. What should you do next?