1.
You have configured an IP-IP tunnel between Router A and Router B Which Junos operational mode command is used to verify that the tunnel interface is up and operational?
2.

Which IS-IS packet is used to determine the level of an IS-IS neighbor?
3.
Router A is an OSPF router connected to both Area 0 and Area 1 Area 1 has been configured as a stub area Which two LSA types does Router A suppress from Area 1?
4.
You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5 as its secondary next-hop. Which command correctly configures this scenario?
5.
Which Junos operational mode command is used to verify that load balancing is working as expected?
6.
Which role does the router ID (RID) have in the BGP route selection process?
7.
You own a home network connecting through an always-on connection and need to assign IPv6 addresses to your routers because you want to follow the guidelines spelled out in RFC 3177. You want to design your network with the correct prefixes. Which prefix would your ISP likely allocate to your network?
8.
Which command would you use to verify the presence of VPN routes on a PE device?
9.
Which statement is true of a Layer 2 circuit?
10.
In an RSTP network, which combination of port types can exist on the root bridge?