1.
Which operational command can verify load balancing?
2.
By default, how is the best IGP path determined when there are multiple equal-cost paths to a destination?
3.
Which STP protection feature should you use to prevent an inadvertent change in topology caused by the receipt of a superior BPDU on an access interface?
4.
Which Junos operational mode command displays all BGP routes sent to the 172.16.1.1 peer?
5.
Which option shows the configuration syntax for a routed VLAN interface on an EX Series switch?
6.
Which of the following is a spanning tree option in EX Series switches?
7.
Which type of route is shown in the following output?
8.
You have connected a spanning-tree-enabled device to your spanning-tree-enabled switch, but the switch port does not forward traffic, even after you remove the device. Which command do you use to re-enable forwarding?
9.
Which BGP attribute can modify only an adjacent AS's optimal entry point into the local AS?
10.
A generated route is used to create a route of last resort when BGP routes from the 10.0.0.0/23 block are present. Given the following output, which next hop will be used as the forwarding next hop for the generated route?