Juniper FXV, Associate (JNCIA-FWV)

Set flow ✘ Set mss-flow size ✘ Settcp-mss flow ✘ Set flowtcp-mss ✔

The VLAN1 interface must have a manage-ip value set ✘ The ScreenOS device must have the transparent option set under Admin options ✘ There must be at least one policy configured ✘ The VLAN1 interface must have an IP address configured ✔

Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access 192.168.1.1 ✘ Connect a PC addressed on the 192.168.1.0 subnet to the highest numbered interface and open a browserand access 192.168.1.1 ✘ Terminate thebootup sequence from the console device, open a browser on the console device and access192.168.1.1 ✘ Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open abrowser to the interface address ✔

Set clock ✘ Set scheduler ✘ Set calendar ✘ Set time ✔

Compact Flash Card ✘ Internal Flash ✘ PCMCIA card ✘ TFTP Server ✔

Source IP, Source port range, destination IP, destination port range and protocol ✘ Source Port, destination port and protocol ✘ Protocol timeout ✘ Source Port range, destination port range and protocol ✔

Source IP, Source port range, destination IP, destination port range and protocol ✘ Source Port, destination port and protocol ✘ Source Port range, destination port range and protocol ✘ Protocol timeout ✔

The VLAN1 interface must have a managed-IP value set ✘ There must be at least one policy configured ✘ The ScreenOS device must have the transparent option set under admin options ✘ The VLAN1 interface must have an IP address configured ✔

Phase 1 gateway failure ✘ Phase 1 proposal mismatch ✘ Phase 2 proposal mismatch ✘ Phase 2 PFS failure ✔

Get log traffic ✘ Get traffic ✘ Get policy log ✘ Get log policy ✔