IBM Virtualization Technical Support and Administration for AIX and Linux -v2 Set 4

Question - 15 Maximum mark : - 26

Home
All Exams
IBM Virtualization Technical Support and Administration for AIX and Linux -v2 Online Mock Tests
IBM Virtualization Technical Support and Administration for AIX and Linux -v2 Set 4

How can SMT be temporarily disabled at the next boot of a Linux LPAR?

Update/proc/cpuinfo special device file. ✘ Use the ppc64_cpu command. ✘ Set linux smt-enabled=off at the boot: prompt. ✘ Use the smtclt command. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

An administrator has dynamically allocated a new virtual FC adapter to an AIX client. When running cfgrngr on the client, the administrator receives the following error: Method error (/usr/lib/methods/cfg_vfc -I fcs0): 0514-040 Error initializing a device into the kernel Which of the following could explain the error?

The client adapter has been configured to use a 32bit kernel. ✘ The fileset devices.vdevice.vfc-client.rte needs to be installed. ✘ The physical fibre channel adapter on the VIO server does not support NPIV. ✘ The client adapter has been configured to use an invalid virtual server adapter ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Consider the following extract from the command Ismap -all -npiv -fmt:
vfchost0:U9119.FHA.44ABCDE-V2-C642:47:: :NOT_LOGGED_IN;fcs2:U5803.001.9112345-P2- C7-
T1:0:4:: vfchost1:U9119.FHA44ABCDE-V2-C643:48:lpar02AIX:LOGGED_IN:fcs2:U5803.001.9112345-P2- C7-
T1:5:a:fcsO:U9119.FHA 44ABCDE-V48-C8-T1 From this information which of the following statements is true?

Virtual adapter vfchost1 is providing rootvg to the client LPAR. ✘ Virtual adapter vfchost0 tried an invalid path to the SAN. ✘ Virtual adapter vfchost1 is associated with adapterfcs0 on Ipar02. ✘ Virtual adapter vfchost0 is pointing to client LPAR id 47. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

A customer is planning a new multi-tiered web based retail solution. The solution will be implemented on AIX, running on POWER7 based servers. Several options are being considered, including one enterprise class system, two mid-range systems, or several entry level systems. Which of these documents will allow for an easy side-by-side comparison of the various models in the Power Systems range?

AIX From Strength to Strength ✘ POWER7 Systems Facts and Features ✘ Redpaper: IBM Systems Virtualization: Servers, Storage, and Software ✘ IBM Power Systems Comparison Manual ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

What is the purpose of the Virtual Asynchronous Services Interface (VASI) during Live Partition Mobility?

It is used by the Hypervisor to determine the placement of the mobile partitions threads. ✘ It is used by the Mover Service Partition to communicate with the Hypervisor. ✘ It is used to direct the Hypervisors placement of the mobile partitions memory tables. ✘ It is used by the Hypervisor to coordinate the I/O movement between the Virtual I/O Servers. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

A system administrator needs to configure a redundant network environment for several AIX and Linux clients on a Power Systems server. Which highly available Virtual I/O server network solution should be used to meet this requirement?

Shared Ethernet Adapter Failover ✘ Network Interface Backup ✘ Link Aggregation ✘ VLAN tagging ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

A VIO server requires redundancy on its Shared Ethernet Adapter (SEA). The SEA is backed by physical adapter ent0 and virtual adapter ent2, ent0 and ent1 are the interfaces on a dual-port Ethernet adapter. What network redundancy technique should be suggested?

ent1 should be used to set up a Network Interface Backup through smitty etherchannel1. The new Etherchannel adapter should be used as the backing device for the SEA ✘ ent1 should be used to set up Link Aggregation through smitty linkagg1. The new Link Aggregation adapter should be used as the backing device for the SEA ✘ Create a new SEA using another virtual Ethernet adapter on the VIO Server and assign ent1 as the backing device. Assign this SEA to the clients and setup Link Aggregation on the clients. ✘ Setup the SEA failover control channel to use the ent1 physical adapter as the backup control channel. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

An administrator would like to use system plans to clone the partition definitions of an existing Power 795 system to a new Power 795. Both systems have the same hardware configuration. When the administrator attempts to deploy the system plan taken from the old system to the new one the 'Deploy System Plan' wizard fails at the hardware validation stage. Which of the following actions would allow the administrator to deploy the system plan from the old system to the new?

Select the Ignore Hardware Validation option when deploying the System Plan. ✘ Use the System Plan Conversion Wizard from the System Plans menu on the HMC. ✘ Export the original sysplan with the Allow Deployment On Remote System1 option. ✘ Use the System Planning Tool (SPT) to validate and convert the original system plan for deployment. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which of the following statements is true when mirroring of the VIO server rootvg?

Only the root user can perform mirroring. ✘ Mirroring is active when the command completes. ✘ Mirroring operations must be performed from a virtual console. ✘ A system reboot will immediately occur upon completion of mirroring. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

10.

What is the default number of NPIV adapters which can be assigned by the Power Hypervisor?

500 ✘ 1024 ✘ 32000 ✘ 65536 ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Prev Next

Congratulations

you have successfully completed the test

Back to Question View Result

Detail Form

We will send your result on your email id and phone no. please fill detail

Name

Email ID Note: Report will be send to the above Email ID

Phone No

IBM Virtualization Technical Support and Administration for AIX and Linux -v2 Set 4

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner