IBM i Administration V1 Set 1

1.

A CL program that runs after an IPL must complete and errors will be researched at a later time. How can all CPF massages be acknowledged so the program continues running?

Add a MONMSG(CPF0000) command immediately before the ENDPGM command. Add a MONMSG(CPF0000) command after the ENDPGM command. Add a MONMSG(CPF0000) command immediately after the PGM command. Add a MONMSG(CPF0000) command before the PGM command.

2.

What does this display from a WRKSYSSTS screen tell the administrator about the system?

Temporary storage is taking up a large proportion of the disk space. A disk in the disk unit subsystem has failed or is being rebuilt. Auxiliary storage is not protected on the system. Auxiliary storage capacity has exceeded the default threshold level.

3.

What is the purpose of the SAVSECDTA command?

To save user profiles, authorization lists, and authority holders To save data in a secure encrypted format To save system state security data and the associated authorization list To save user data in a secured format and the encryption keys

4.

A system administrator has just changed the password of the QSECOFR user profile. After verifying the new password with a successful login to the operating system, the administrator attempts a login to System Service Tools with STRSST. All Service Tools login attempts fail with the error CPF225D: Requesting service tools ID password not correct. Why is the administrator unable to login to System Service Tools with the new QSECOFR password?

The Service Tools password must be set to the default value before it can be changed. The Service Tools security environment has not been configured to allow QSECOFR passwords to be synchronized. The QSECOFR user profiles for System Service Tools and IBM i are not interchangeable and passwords must be maintained independently. The system value QLMTSECOFR (Limit security officer device access) is set to block sharing of passwords for QSECOFR.

5.

An administrator has been notified that company auditors will need access to a system for 14 days from the current date. The profiles are created but there is a well-defined company policy about inactive profiles. What can be done in each profile to insure the policy is enforced?

Set the USREXPDATE field to *USREXPITV
Set the USREXPITV field to 14

Set the SPCENV field to *EXPTEMPSet the PWDEXPITV field to 14

Set the PWDEXP field to 14Set the USROPT field to *EXPSCD

Set the PWDEXPITV field to 14Set the STATUS field to *TMPACT

6.

An administrator wants to determine the remaining life of cache batteries in disk controllers. Where is this information presented?

In SST, under Hardware Service Manager In the Work with Disk Status display In SST, under Work With Disk Units and Display Disk Configuration In IBM i Navigator, select Hardware and then Adapters

7.

An administrator added a prestart job entry to the QCMN subsystem using the following command:
ADDPJE SBSD(QCMN) PGM(PGMA) INLJOBS(350) THRESHOLD(250) ADLJOBS(150) MAXUSE (200)
The entry is used extensively and many remote requests connect to the prestart jobs. After adding the entry, the administrator determines that the system periodically freezes and response time is slow. What is the most likely cause of the problem?

The ADLJOBS parameter is too high and many system resources are used at the same time to generate new prestart jobs. The MAXUSE parameter is too low and a big job log is generated when the last request uses the prestart job. There are not enough system resources in QCMN to handle the additional jobs. The prestart job entry competes with the TCP/IP jobs.

8.

An administrator notices that the QEZJOBLOG output queue has an unusually high number of entries. The same job name which runs many times throughout the day, and always ends normally, is associated with the output queue entries. Which job description change can be made to limit the number of job logs created?

Change the SPLFACN parameter to *NOLIST

Change the LOGCLPGM parameter to *NO

Change the LOG parameter to 4 00 *NOLIST

Change the LOGOUTPUT parameter to *JOBEND

9.

Which statement is correct about installing system firmware on a single image system that has no HMC?

The updates are concurrent when PowerVM Enterprise Edition is installed. The updates are always disruptive. The updates are concurrent when the firmware version stays the same. The updates are disruptive only when PowerVM Express is installed.

10.

Which tool is appropriate to determine if Solid State Drives will improve disk performance in an environment?

Performance Navigator for IBM i Disk Magic with SSD extraction SSD Analyzer Tool for IBM i Disk Performance Calculator

IBM i Administration V1 Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

IBM i Administration V1 Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner