IBM AIX 7 Administration

1.

With regard to an existing AIX 5.2 installation, what source format is required by the mkwpar command to create a Versioned WPAR of this existing system?

SPOT MKSYSB RAW OVA

2.

An administrator created a log logical volume named dbfs2loglv. Given the following output, why did the system create and use a new log logical volume rather than the log logical volume that the administrator specified?

The filesystem was built with a mirrored logical volume and 2 log logical volumes are needed. The administrator created the db2fsloglv log but neglected to format it with the logform command. The db2fsloglv log was created as a JFS log and a JFS2 log was needed. There was already another filesystem using the db2fsloglv when the filesystem was created

3.

In order to enable an AIX host to use one virtual Ethernet adapter to communicate on multiple VLANs, what is required?

The VLAN devices used by the host must be configured with IP addresses on different subnets. The virtual Ethernet adapter must be set to full duplex in AIX. VLAN devices must be configured in the AIX host. The virtual Ethernet adapter must be configured as a trunk adapter.

4.

An administrator needs to restore all files in the /myfs/test directory of the non-rootvg volume group backup, which is located on device /dev/cd1, and write the restored files to /data/myfiles. Which is the correct command?

restvgfiles -f /dev/cd1 -r-s -d /data/myfiles ./myfs/test restore -Tf /dev/cd1 -r -s -d /data/myfiles /myfs/test restvgbackup -f /dev/cd1 -r-s -d /data/myfiles ./myfs/test Ismksysb-f/dev/cd1 -r-s-d/data/myfiles ./myfs/test

5.

Which is a benefit of dynamic tracking of Fibre Channel devices?

I/O failures are prevented with Fibre Channel tape devices. SAN changes are automatically detected. SAN disk arrays are created with a common set of disk attributes. NPIV support is added for all AIX Fibre Channel adapters.

6.

Which command displays from which disk the operating system was last booted?

last bosboot getconf bootlist

7.

A company has numerous LPARs hosting database servers, and three versions of the DBMS deployed in the environment. A critical APAR fixes data corruption for one version of the database, but it requires a server reboot. The only inventory information available is a spreadsheet with every LPAR's hostname and root password. Which sequence of tasks will determine which servers are missing the critical APAR, and only apply it to the servers running the affected level of the database?

Use the spreadsheet to populate the /etc/hosts file on the management node. Configure a NIM server that has the APAR in an lpp_source.

Force-register all of the LPARs with the NIM server. Use NIM group operations to install the APAR and boot at a scheduled time. Use the spreadsheet to create a dsh node list.Use dsh with Islpp to create a node list for LPARs needing the APAR. Use dcp and dsh to install the APAR and reboot. Configure a Systems Director server using the spreadsheet import function.Use the inventory function to discover the database level and APAR status. Use the Update Manager to apply the APAR to the affected LPARs and reboot. Use the spreadsheet to create a dsh node list.Use dcp and dsh to install the APAR.

Use dsh to reboot the systems.

8.

What is required to support VLANs in an AIX partition?

IEEE 802.1Q compatible adapter Promiscuous mode disabled IEEE 802.3ad compatible interface QoS must be enabled

9.

How can administrators ensure that the Integrated Virtual Ethernet (IVE) adapters in their servers have the latest available firmware?

By upgrading the given IBM Power Systems server to the latest available system firmware. By using inventory scout to query the installed firmware level against the available level. By using either the managing HMC, SDMC or IVM to query and update the adapter firmware. By using the Ismcode AIX command with the query flag.

10.

Why would the 'bffcreate -d /dev/cd0 -t/tmp/images all' command be run?

To create installation or update images of all software packages from media in /dev/cd0 To install all software packages from the media in /dev/cd0 that have prerequisites met on the system or in /tmp/images. To make a file in /tmp/images that lists all of the software packages on media in /dev/cd0 To make a copy of all software in /tmp/images and store onto the writable media in /dev/cd0

IBM AIX 7 Administration

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

IBM AIX 7 Administration

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner