HP Supporting MSL2024 and MSL4048 Tape Libraries Set 3

1.

When do you have to terminate the MSL2024 tape library?

when using a standard differential or high-voltage differential (HVD) SCSI bus to make it compatible with a narrow (50-pin) SCSI bus using high-byte termination only when using a single-ended SCSI HBA (SCSI-3 LVDS will terminate automatically) when the library is the only SCSI device, other than the SCSI HBA, or when the library is physically the last device on the SCSI bus

2.

SCSI devices are recognized on the SCSI buses of the Fibre Channel interface, but do not appear on the Fibre Channel host. What is the most probable cause?

too many SCSI devices in the map improperly established Fibre Channel link no separate HBA for tape devices in the host too many SCSI devices connected to the Fibre Channel controller

3.

What is the SCSI-ID with the highest priority on a wide SCSI bus?

7 8 15

4.

Which Tape drive format uses two reel cartridge design

DLT LTO-1 LTO-3 DDS/DAT

5.

When connecting an MSL2024 or 4048 Library with an NSR N1200 to a fiber channel SAN, How are fiber channel LUNs assigned.

With the LUN management of NSR With HP command view MSL Software With Hardware Assisted Zoning in the SAN switch With the persistent binding in the HBA driver configuration file.

6.

Where do you find the letest information about supported HBAs.

EBS compatibility matrix HBAs Vendors web pages Hetrogenious SAN design guide Support Pages on HP website

7.

What must be done before you connect the cables to direct SCSI attached MSL2024 or MSL4048 Libraries?

connect the terminator to the library Disable the device in the windows device manager Do a rescan of the SCSI devices in the operating system shutdown and turn off the selected server. Remove the power cord. Turn off all devices connected to the SCSI bus. Remove the power cords

8.

In a direct FC connect MSL2024 tape library, the devices are present in the OCP but cannot be seen by the host. What is the most probable cause?

The HBA had already assigned disk storage the devices have not been maapped to the host Fiber channel speed is set incorrectly in the OCP Too manay devices are connected in the fiber channel switch

HP Supporting MSL2024 and MSL4048 Tape Libraries Set 3

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

HP Supporting MSL2024 and MSL4048 Tape Libraries Set 3

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner