×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
You must configure link aggregation on an HP A-Series switch. Which view should you enter to create the link aggregation group?
2.
What is the default Spanning Tree Protocol on HP A-Series switches?
3.
An HP A-Series switch includes the following configuration: stp region-configuration
region-name hp-enterprise
instance 1 vlan 10 to 99
instance 2 vlan 100 to 199
revision-level 0
active region-configuration
Which VLANs are in instance 0?
region-name hp-enterprise
instance 1 vlan 10 to 99
instance 2 vlan 100 to 199
revision-level 0
active region-configuration
Which VLANs are in instance 0?
4.
The front-panel security settings on an HP E5400 zl Series switch are at default. How can you gain access to the CLI of the switch if the manager and operator passwords have been lost?
5.
A customer requires SFTP to transfer configuration files to an HP E5400 zl Series switch. What must be enabled on the switches to fulfill this requirement?
6.
You must configure an HP switch for deployment at a site that requires all management sessions to be encrypted. The site administrators will use the CLI for configuration and management. Which management protocol must be implemented to meet these requirements?
7.
You must implement an SNMPv2c solution that will use standard SNMP-Set messages to configure HP switches. Which property must match on the SNMP server and the switches?
8.
How does the distributed link aggregation technology used in IRF provide link redundancy?
9.
What is indicated by the 2 in this prompt from an HP A5800 switch? [Switch-Gigabit-Ethernet2/0/1]
10.
At a customer site, you enter the following command into the CLI of an HP A-Series switch: stp bpdu-protection Which BPDUs will the switch discard?