×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
Which routing protocol is classified as a distance vector?
2.
The IP route table of an HP E5406 zl Series switch includes a route for 10.5.0.0/16 with a gateway of 192.35.35.1. What is the effect of the following command? Switch(config)# ip route 10.5.1.0/24 172.42.42.3
3.
When RIP is enabled on HP E5406 zl Series switches, which routes are automatically redistributed to RIP peers?
4.
What is the effect of the following command, issued at the CLI of an HP E5406 zl Series switch with IP routing enabled? Switch(config)# ip route 0.0.0.0/0 10.6.254.2
5.
On an HP A12500 switch, which type of port can support only one untagged VLAN and multiple 802.1Q VLANs?
6.
Which view is indicated by the following prompt on an HP A7500 switch? [A7500]
7.
You must connect an E-MSM Access Point to a switch that supports the PoE+ (802.3at) standard. What is the maximum amount of power the AP will be able to receive from the switch?
8.
You have successfully installed an HP PCM+ remote client on a network administrator's workstation. Which step is necessary to enable the client to access the PCM+ server?
9.
What is an advantage of using a ring topology when designing an IRF stack using A-Series switches?
10.
You enter the following command at the CLI of an HP E5412 zl Series switch: Switch(config)# spanning-tree priority Which Bridge Priority value is displayed when you enter show spanning-tree?