HP Implementing HP Networking Technologies Set 2

Which Spanning Tree Protocol is enabled when the following command is entered at the CLI of an HP E5412 zl switch at default settings? E5412(config)# spanning-tree

Which privilege level is indicated by the following prompt at the CLI of an HP E5400 zl Series switch? Switch>

You have configured a static LACP port trunk that includes ports D1-D4 on an HP E8212 zl switch. You have added the trunk to VLAN 23 as a tagged member. No other ports are tagged members of this VLAN. You have verified that the trunk configuration on the switch on the other side of the trunk is correct. How will the switch handle broadcast traffic destined for VLAN 23?

{Incomplete: characters/words missing!} You are configuring device access security on an HP E5400|... an operator password to be stored on the switch? (Select t|...

Which protocols are classified as Interior Gateway Protocols (IGP)?

You are configuring a brand new A5120 SI switch. You would like to enhance the security on the switch by configuring an administration password that will be stored in encrypted form. Which CLI command will configure an administration level 3 password of "pass3" on the switch?

You are configuring a brand new A5120 SI switch. You have configured SSH on the switch. You are connected through a console cable and would like to allow remote access only through the SSH protocol. Which command should you use?

How is the first Telnet interface for A-Series switches identified in the CLI?

What is the default IRF member ID for an HP A-Series switch?

Which steps are necessary to configure MSTP on A-Series switches and make them compliant with industry standards? (Select four.)