HP Delta Supporting HP Industry Standard Server Solutions

1.

Where can you verify the status of an external DVD-ROM drive in a c7000 enclosure?

Active Health Log Integrated Management Log Virtual SAS Manager Insight Display

2.

What should be installed on a ProLiant Gen8 server to display operating system information within the iLO 4 GUI?

HP Management Agents System Management Home Page Agentless Management Service ProLiant Support Pack

3.

Which button should you press to enter the RBSU during POST?

F8 F9 F11 F12

4.

Which steps should you perform to save a Virtual Connect configuration?

enclosure setting, configuration scripts, show config, save enclosure setting, configuration scripts, inventory from CLI: show all > cfg,txt VCM, Tools, Backup/Restore Domain Configuration

5.

Why should you use an electrostatic discharge (ESD) wrist strap when replacing parts such as memory DIMMs?

It prevents the part from being damaged by static electricity. It incorporates high resistance and dissipates electrical charges into the ozone. A 48 V DC PSU will contribute to higher static electricity. A current of more than 75 mA can kill someone.

6.

You replaced a Smart Array P812 in a ProLiant DL380 G7 storage server. What should you do next?

Check the FBWC charge. Replace the cache module. Install the BBWC battery. Verify that the firmware level is current.

7.

What can an engineer use to ensure quick, precise, intelligent installation when installing CPUs in a ProLiant Gen8 server?

HP Smart Socket Guide HP Intelligent Provisioning HP CPU Slot Isolation HP Hot Plug CPU Sockets

8.

A support engineer needs to add memory to a ProLiant ML350p Gen8 server. What should the engineer consider when selecting the DDR3 DIMMs to install in this server?

Registered DIMMs (RDIMMs) are supported, offer larger capacities than UDIMMs. and include address parity protection. Load Reduced DIMMs (LRDIMMs) are supported use the least power, and have the lowest latencies for the same memory clock speeds. Unbuffered DIMMs (UDIMMs) are supported and meet low power and large capacity requirements. Hypercloud DIMMs (HDIMMs) are supported and operate at four DIMMs per channel with all memory channels populated.

9.

Which Virtual Connect module enables FCoE or iSCSI connectivity for BladeSystemserver blades?

VC FlexFabric VC FIex-10 VC-FC 8/24 VC 1/10Gb-F

10.

How can you verify that the system and option ROMs in a ProLiant server are the latest version?

Review the information in the Insight Display. Launch the Intelligent Management Center and view updates. Restart the server and review ORCA. Restart the server and review POST.

HP Delta Supporting HP Industry Standard Server Solutions

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

HP Delta Supporting HP Industry Standard Server Solutions

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner