HP Delta Integrating HP ProLiant Server Solutions

1.

What is a benefit of advanced memory protection on HP ProLiant BL460c Gen9 servers?

It helps to eliminate unplanned downtime by using advanced error checking, demand scrubbing, and patrol scrubbing. It helps to reduce latency for communications between a server and remote storage on the network. It helps to ensure compliance with regulatory standards by using HP Smart Encryption to encrypt all data at rest. It helps to prevent lost data during a power outage by backing up data to a non-volatile storage medium.

2.

Which pre-boot environment allows an integrator to update firmware with a fwupdate command?

Rom Based Setup Utility (RBSU) HP SSA CLI HP Intelligent Provisioning HP UEFI Embedded Shell

3.

An integrator is installing an HP ProLiant BL460c Gen9 server into device bay 13 of an HP c7000 BladeSystem Enclosure. The integrator needs to access the UEFI System Utilities on the new server, but is unable to do so because the iLO4 Integrated Remote Console is not accessible.
Where can the integrator confirm the IP address of the iLO4 interface for this blade?

in Network Access in the Onboard Administrator in the iLO4 Web interface using the BladeSystem in Enclosure Bay IP Addressing in the Onboard Administrator in Enclosure TCP/IP Settings in the Onboard Administrator

4.

How should the server integrator use to standardize settings for HP BladeSystem Enclosure interconnect modules?

Define the settings in a logical interconnect group for an enclosure group. Install Virtual Connect Manager (VCM) into HP OneView and copy the settings from VCM. Create and deploy an HP OS build plan for the interconnect modules. Use the Template view to create a template for the interconnect modules.

5.

Under which circumstance will a server integrator need to access the HP Unified Extensible Firmware Interface (UEFI)?

to run reports on the health status and error conditions on multiple servers to add a server to an iLO Federation management group to download an HP Service Pack for ProLiant (SPP) to configure PXE boot options

6.

A customer with HP ProLiant DL360 Gen9 servers needs to combine Fibre Channel over Ethernet (FCoE) with their LAN traffic over a single 10GbE connection.
Which FlexFabric adapter meets the customer's needs?

HP FlexFabric 20GB 2-port 630FLB Adapter HP FlexFabric 10GB 2-port 556FLR-SFP+ Adapter HP FlexFabric 650M 2-port Adapter HP FlexFabric 20GB 2-port 650FLB Adapter

7.

A customer is planning where to locate their servers in the data center and how to manage and monitor power consumption. They have purchased HP iPDU units for the cabinets where HP ProLiant Gen9 servers will be installed.
Which guideline must the integrator follow when installing the new iPDUs?

HP Intelligent Series Racks are required to use HP Location Discovery Services. HP Location Discovery Services is required for Remote Monitored PDUs. The iPDU display must be mounted on the outside of the front cabinet door. HP Flexible Slot Platinum Supplies must be installed to use HP Power Discovery Services.

8.

Power was lost to an HP ProLiant DL380 Gen9 Server. The system ROM is now corrupted and the server can no longer boot.
What should the integrator do first to correct this problem?

Relocate the redundant ROM chip to the primary ROM chip. Replace the system board. Remove the system board battery for 60 seconds. Set the system maintenance switch positions S1, S5, and S6 to on.

9.

A customer has two HP

Create a new logical interconnect group for the new enclosure and synchronize it with the current enclosure group. Add a new enclosure group and a new logical interconnect group for the new enclosure, then configure uplinks and IGMP settings identically to theoriginal logical interconnect group. Add a new enclosure to the current enclosure group and update the logical interconnect configuration from the current logical interconnect group. Add a new enclosure to the current enclosure group.

10.

How do HP Intelligent Power Distribution Units (iPDUs) help server integrators?

They provide backup power for servers, helping to prevent costly network outages and unplanned downtime. They integrate power with cooling components, based on American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE)standards. They dynamically distribute power to different servers in the rack based on policies defined by integrators. They track power consumption with high accuracy and toward the data to HP OneView, where integrators can view it.

HP Delta Integrating HP ProLiant Server Solutions

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

HP Delta Integrating HP ProLiant Server Solutions

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner