1.
Which additional value should you focus on during a solution presentation for an HPE 3PAR StoreServ system using 384 TB cMLC SSD drives to appeal to the interests of the company's CFO?
2.
At which level is an HPE 3PAR StoreServ deduplication performed?
3.
You are planning an HPE StoreVirtual architecture based on a customer's physical site configuration. The customer has two physical sites and wants to span the cluster between them and requires that all sites should be peers.
What should be done to meet this customer's requirements?
4.
You need to quickly determine if a software upgrade is available for an HPE 3PAR StoreServ system.
Where can you locate this information?
5.
Which requirements must be considered when designing and sizing an HPE 3PAR StoreServ environment for periodic asynchronous replication?
6.
You are designing a Fibre Channel storage solution for a customer who is currently attaching all hosts through the Ethernet and the TCP/IP protocol.
What is an advantage of choosing Fibre Channel over TCP/IP?
7.
You are designing an iSCSI solution for a customer with one data center, who is investing in a second data center that will be ready in the near future.
The networking infrastructure of the current data center is generally sufficient for use with an iSCSI storage solution, but it is from a different vendor. The new data center will be equipped with current HPE Networking switches.
What should you keep in mind when discussing the use of Ethernet Jumbo Frames for this environment?
8.
Which resource can be used to verity storage system support when using HPE FlexFaDnc 5900CP switches in a solution design?
9.
Which tool should you use to quickly determine HPE 3PAR Storeserv hearth and performance
10.
Your customer is concerned about downtime during storage system upgrades.
Which method of technology addresses this concern when using an HPE 3PAR StoreSefv solution1?