HP BladeSystem Networking

1.

What is considered a Virtual Connect domain in Virtual Connect Enterprise Manager?

a maximum of 1,000 enclosures a maximum of 16,000 servers from 1 to 4 enclosures 250 Virtual Connect Manager domains

2.

Which spanning tree protocol is the most appropriate in a VLAN-aware, non-proprietary network implementation?

RSTP PVST+ MSTP STP

3.

The IEEE 802.1AX (802.3ad) Link Aggregation Control Protocol is a Layer 2 protocol. What is its function?

dynamically identifies link speeds regardless of media type forms port trunks consisting of two or more uplink ports identifies the VLAN to which frames transmitted on a link or port trunk belong advertises information that describes and identifies devices

4.

What is used to achieve Fibre Channel data transfer?

channel mesh packets tunnels frames

5.

You are creating a connection between multiple server blades and an external switch on a single VLAN. All traffic from the servers is tagged. What must you create within Virtual Connect if it is globally set for VLAN Tunnel mode?

simple vNET with Tunnel mode option enabled Shared Uplink Set simple vNET with Tunnel mode option disabled untagged uplink trunk

6.

Where are broadcasts flooded in Layer 2 switches?

to only those nodes in the same subnet as the originating node through all ports except the port the broadcast came in on through all ports in the same VLAN except the port it came in on through all ports and all VLANs on the switch

7.

In an IP subnet without VLANs, each subnet terminates at the interface. How are IP subnets with VLANs different?

VLAN IP subnets terminate at each port. VLAN IP interfaces are more easily multi-netted with VLANs. VLAN IP subnets allow for greater control with ACLs. VLAN IP subnets are logically separated from the router.

8.

What is the function of the active member of a dynamic LACP trunk?

determines the trunk link used for each given Layer 2 node-to-node conversation requests dynamic port utilization from the receiving node to the sending node to form the LACP trunk listens for BPDUs and forms a dynamic trunk when a MAC address of the same partner is heard on multiple ports sends BPDUs and forms a dynamic trunk if a partner hears its MAC address on multiple ports

9.

What is a limitation of the VMware vNetwork standard switch?

Tagged VLANs are not supported in a virtual switch. MAC forwarding tables are not implemented in a virtual switch. Virtual machines cannot communicate through the virtual switch. Spanning tree is not supported in a virtual switch.

10.

Which Virtual Connect tagging mode is limited to 320 VLANs per Virtual Connect Ethernet module?

Tunnel VLAN Tags Tagged VLAN Map VLAN Tags Transparent VLAN Tags

HP BladeSystem Networking

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

HP BladeSystem Networking

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner