×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
Which parameter is enabled by default on an HP Commware switch, but disabled by default on an HP ProVision switch?
2.
A routing protocol has three characteristics:
- Has fast convergence with triggered, incremental updates via link state advertisements (LSAs)
- Is classless protocol allowing for a hierarchical design with VLSM and route summarization
- Uses an intelligent metric (cost), which is the inverse of the bandwidth of an interface
Which protocol is it?
- Has fast convergence with triggered, incremental updates via link state advertisements (LSAs)
- Is classless protocol allowing for a hierarchical design with VLSM and route summarization
- Uses an intelligent metric (cost), which is the inverse of the bandwidth of an interface
Which protocol is it?
3.
Which HP ProVision switch command could a network administrator use to upgrade the operating system from an attached USB drive?
4.
A network administrator attempts to create a loopback interface on an HP Comware switch, and it fails. These are the commands the network administrator issues to do this.
[Comware] interface loopback 2
[Comware-Loopback2] ip address 172.18.20.1 255.255.255.0
What is the problem with the proposed configuration/
[Comware] interface loopback 2
[Comware-Loopback2] ip address 172.18.20.1 255.255.255.0
What is the problem with the proposed configuration/
5.
A network administrator configures this command on an HP ProVision Switch:
Vlan 30 ip helper-address 10.0.3.253
After the network administrator configures the command, using in VLAN 30 report that their PCs fail to acquire addresses using DHCP. Which command must the network administrator add to the ProVision switch configuration to solve this problem?
Vlan 30 ip helper-address 10.0.3.253
After the network administrator configures the command, using in VLAN 30 report that their PCs fail to acquire addresses using DHCP. Which command must the network administrator add to the ProVision switch configuration to solve this problem?
6.
Which HP solution delivers automated virtual machine orchestrator, automatic synchronization of network connectivity information, and visibility to performance of wired and wireless users?
7.
Which method of link aggregation do both HP ProVision and Comware switches support?
8.
What is a valid reason to choose an 802.11a wireless implementation?
9.
A customer has an HP ProVision switch capable of Layer 3 forwarding: however, Layer 3 forwarding is disabled. The switch has an IP address in the management VLAN, where the default gateway is 10.1.1.1, which ProVision command should the network administrator use so the ProVision switch can access the Intelligent Management Center (IMC) server in a different VLAN?
10.
On an HP Comware switch, which view must an administrator access in order to execute the debug command?