Examine the two static routes to the same destination subnet 172.20.168.0/24 as shown below; then answer the question following it.
config router static
edit 1
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 10
set device port1
next
edit 2
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 20
set device port2
next
end
Which of the following statements correctly describes the static routing configuration provided above?
Examine the static route configuration shown below; then answer the question following it.
config router static
edit 1
set dst 172.20.1.0 255.255.255.0
set device port1
set gateway 172.11.12.1
set distance 10
set weight 5
next
edit 2
set dst 172.20.1.0 255.255.255.0
set blackhole enable
set distance 5
set weight 10
next
end
Which of the following statements correctly describes the static routing configuration provided? (Select all that apply.)
In the case of TCP traffic, which of the following correctly describes the routing table lookups performed by a FortiGate unit when searching for a suitable gateway?
Shown below is a section of output from the debug command diag ip arp list. index=2 ifname=port1 172.20.187.150 00:09:0f:69:03:7e state=00000004 use=4589 confirm=4589 update=2422 ref=1 In the output provided, which of the following best describes the IP address 172.20.187.150?
The transfer of encrypted files or the use of encrypted protocols between users and servers on the internet can frustrate the efforts of administrators attempting to
monitor traffic passing through the FortiGate unit and ensuring user compliance to corporate rules.
Which of the following items will allow the administrator to control the transfer of encrypted data through the FortiGate unit? (Select all that apply.)
A DLP rule with an action of Exempt has been matched against traffic passing through the FortiGate unit. Which of the following statements is correct regarding how this transaction will be handled by the FortiGate unit?
The following diagnostic output is displayed in the CLI:
diag firewall auth list
policy iD. 9, srC. 192.168.3.168, action: accept, timeout: 13427
user: forticlient_chk_only, group:
flag (80020): auth timeout_ext, flag2 (40): exact
group iD. 0, av group: 0
----- 1 listed, 0 filtered ------
Based on this output, which of the following statements is correct?