×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
With FSSO, a domain user could authenticate either against the domain controller running the Collector Agent and Domain Controller Agent, or a domain controller
running only the Domain Controller Agent.
If you attempt to authenticate with the Secondary Domain Controller running only the Domain Controller Agent, which of the following statements are correct?
(Select all that apply.)
2.
Examine the two static routes to the same destination subnet 172.20.168.0/24 as shown below; then answer the question following it.
config router static
edit 1
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 10
set device port1
next
edit 2
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 20
set device port2
next
end
Which of the following statements correctly describes the static routing configuration provided above?
config router static
edit 1
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 10
set device port1
next
edit 2
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 20
set device port2
next
end
Which of the following statements correctly describes the static routing configuration provided above?
3.
Examine the static route configuration shown below; then answer the question following it.
config router static
edit 1
set dst 172.20.1.0 255.255.255.0
set device port1
set gateway 172.11.12.1
set distance 10
set weight 5
next
edit 2
set dst 172.20.1.0 255.255.255.0
set blackhole enable
set distance 5
set weight 10
next
end
Which of the following statements correctly describes the static routing configuration provided? (Select all that apply.)
4.
In the case of TCP traffic, which of the following correctly describes the routing table lookups performed by a FortiGate unit when searching for a suitable gateway?
5.
Shown below is a section of output from the debug command diag ip arp list.
index=2 ifname=port1 172.20.187.150 00:09:0f:69:03:7e state=00000004 use=4589 confirm=4589 update=2422 ref=1
In the output provided, which of the following best describes the IP address 172.20.187.150?
index=2 ifname=port1 172.20.187.150 00:09:0f:69:03:7e state=00000004 use=4589 confirm=4589 update=2422 ref=1
In the output provided, which of the following best describes the IP address 172.20.187.150?
6.
Which of the following statements correctly describe Transparent Mode operation? (Select all that apply.)
7.
In Transparent Mode, forward-domain is an attribute of ______________.
8.
Which of the following statements are TRUE for Port Pairing and Forwarding Domains? (Select all that apply.)
9.
Which of the following is an advantage of using SNMP v3 instead of SNMP v1/v2 when querying the FortiGate unit?
10.
An administrator logs into a FortiGate unit using an account which has been assigned a super_admin profile. Which of the following operations can this administrator perform?