F5-BIG-IP v10.x LTM Essentials V10.x

Question - 35 Maximum mark : - 66

Home
All Exams
F5-BIG-IP v10.x LTM Essentials V10.x Online Mock Tests
F5-BIG-IP v10.x LTM Essentials V10.x

Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the pool members?

No SSL certificates are required on the pool members. ✘ The poolmembers SSL certificates must only exist. ✘ The poolmembers SSL certificates must be issued from a certificate authority. ✘ The poolmembers SSL certificates must be created within the company hosting the BIG-IPs. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Assume a virtual server is configured with a ClientSSL profile. What would the result be if the virtual server's destination port were not 443?

SSL termination could not be performed if the virtual server's port was not port 443.

✘ Virtual servers with aClientSSL profile are always configured with a destination port of 443. ✘ As long as client traffic was directed to the alternate port, the virtual server would work as intended. ✘ Since the virtual server is associated with aClientSSL profile, it will always process traffic sent to port443. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which is an advantage of terminating SSL communication at the BIG-IP rather than the ultimate web server?

Terminating SSL at the BIG-IP can eliminate SSL processing at the web servers. ✘ Terminating SSL at the BIG-IP eliminates all un-encrypted traffic from the Internal network. ✘ Terminating SSL at the BIG-IP eliminates the need to purchase SSL certificates from a certificateauthority. ✘ Terminating SSL at the BIG-IP eliminates the need to use SSL acceleration hardware anywhere in thenetwork. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If the origin server were to initiate traffic via the BIG-IP, what changes, if any, would take place when the BIG-IP processes such packets?

The BIG-IP would drop the request since the traffic didn arrive destined to the NAT address. ✘ The source address would not change, but the destination address would be changed to the NATaddress. ✘ The source address would be changed to the NAT address and destination address would be leftunchanged. ✘ The source address would not change, but the destination address would be changed to a self- IP of theBIG-IP. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

A site wishes to perform source address translation on packets arriving from the Internet for clients using some pools but not others. The determination is not based on the client's IP address, but on the pool they are load balanced to. What could best accomplish this goal?

A SNAT for all addresses could be defined, and then disable the SNAT processing for select pools. ✘ The decision to perform source address translation is always based on VLAN. Thus, the goal cannot beachieved. ✘ For each virtual server, regardless their default load balancing pools, association with SNAT pools couldvary dependent upon need. ✘ The decision to perform source address translation is always based on a client's address (or network).Thus, this goal cannot be achieved. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

A BIG-IP has two load balancing virtual servers at 150.150.10.10:80 and 150.150.10.10:443. The port 80 virtual server has SNAT automap configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to https://150.150.10.10, what is the source IP address when the associated packet is sent to the pool member?

200.200.1.1 ✘ 150.150.10.11 ✘ Floating self IP address on VLAN where the packet leaves the system ✘ Floating self IP address on VLAN where the packet arrives on the system ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which statement is true concerning SNATs using automap?

Only specified self-IP addresses are used asautomap addresses. ✘ SNATs usingautomap will translate all client addresses to an automap address. ✘ A SNAT usingautomap will preferentially use a floating self-IP over a non-floating self-IP. ✘ A SNAT usingautomap can be used to translate the source address of all outgoing traffic to the sameaddress regardless of which VLAN the traffic is sent through. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which statement describes a typical purpose of iRules?

iRules can be used to add individual control characters to an HTTP data stream. ✘ iRules can be used to update the timers on monitors as a server load changes. ✘ iRules can examine a server response and remove it from a pool if the response is unexpected. ✘ iRules can be used to look at client requests and server responses to choose a pool member to selectfor load balancing ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

A virtual server is listening at 10.10.1.100:80 and has the following iRule associated with it: when HTTP_REQUEST { if { [HTTP::header User-Agent] contains "MSIE" } { pool MSIE_pool } else { pool Mozilla_pool } If a user connects to http://10.10.1.100.html and their browser does not specify a User-Agent, which pool will receive the request?

MSIE_pool ✘ Mozilla_pool ✘ None. The request will be dropped. ✘ Unknown. The pool cannot be determined from the information provided. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

10.

Which event is always triggered when the client sends data to a virtual server using TCP?

HTTP_DATA ✘ CLIENT_DATA ✘ HTTP_REQUEST ✘ VS_CONNECTED ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Prev Next

Congratulations

you have successfully completed the test

Back to Question View Result

Detail Form

We will send your result on your email id and phone no. please fill detail

Name

Email ID Note: Report will be send to the above Email ID

Phone No

F5-BIG-IP v10.x LTM Essentials V10.x

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner