Extreme Networks Associate (ENA 100) Set 4

The master port of any load share groups. ✘ The speed and duplex settings of the ports connecting the two switches. ✘ The active load sharing algorithm. ✘ The port number of the remote switch that connects to the local switch. ✔

Enter the command disable ports learning 1-8. ✘ Enter the command disable mac-learning ports 1-8. ✘ Enter the command disable ports mac-learning 1-8. ✘ Enter the command disable learning ports 1-8. ✔

2 3 4 5

priority_ports_track_mac ✘ ports_track_priority_mac ✘ ports_priority_track_mac ✘ priority_track_ports_mac ✔

The ESRP hello timer settings are different for each switch. ✘ The ESRP-enabled switches are using different master election algorithms. ✘ The ESRP-enabled switches are using different IP addresses for the ESRP-enabled VLAN. ✘ None of these. ✔

enable esrp add track-iproute 10.0.0.0/24 ✘ config esrp add track-iproute 10.0.0.0/24 ✘ enable vlan add track-iproute 10.0.0.0/24 ✘ config vlan add track-iproute 10.0.0.0/24 ✔

Configure ESRP priority 0. ✘ Configure ESRP priority 1. ✘ Configure ESRP priority 254. ✘ Configure ESRP priority 255. ✔

config esrp-group 5 vlan finance ✘ config vlan finance esrp-group 5 ✘ config esrp vlan finance esrp-group 5 ✘ config esrp esrp-group 5 vlan finance ✔

Link failures result in immediate triggered updates. ✘ Router adjacencies are formed more quickly. ✘ It is not necessary to utilize loop resolution protocols. This command configures a virtual link to the backbone area. ✘ This command configures a virtual link to the backbone area. ✔

autonomous system and area. ✘ virtual link and area. ✘ backbone and area. ✘ LSDB and LSA. ✔