×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
Step response of the system is defined as
1. The output due to a unit step input signal
2. The running sum of impulse response
3. The running integral of impulse response for a continuous time system
1. The output due to a unit step input signal
2. The running sum of impulse response
3. The running integral of impulse response for a continuous time system
2.
The process of assigning to each one of the sample values of the message signal, a discrete value from a prescribed set of a fiite number of such discrete values is called.
3.
If bandwidth is of primary concern, which one of the following scheme is generally not considered?
4.
To avoid slope overload error in delta modulation, the maximum amplitude of the input signal is
5.
A telephone signal band limited to 4 kHz is to be transmitted by PCM. If the signal to quantization noise is to be at leasst of 40 dB, the number of levels into which the signal is to be encoded will be
6.
7.
When the carrier and one of the sidebands are suppressed in an AM wave modulated to a depth of 50%, the power saving will be
8.
9.
For a two-port network, the condition of symmetry in terms of z-parameters is
10.
Master-Slave flip-flop is also called