Dell MySQL Cloud Service 2018 Implementation Essentials

A technician needs to add an IP for management. When adding an IP, the technician received the following message:
Console (config-if-vlan1) #ip address 10.16.24.32/27
Failed to set IP address on interface.
What is causing this message?

How will RIP treat packets that have exceeded the default maximum hop count?

The "show ip ospf database" command outout indicates Type 5 LSAs. What does presence of Type 5 LSA indicate?

Which of the following is an IPv4 address?

What does the blinking yellow Activity/PoE LED indicate on an N-Series switch?

Refer to the output:
A technician creates a new fiber connection to the switch. The transceivers and cable are plugged in at both ends. The connection is in a link down state. What is causing the issue?

A Dell Networking N3024 has a link aggregation configured as shown:
interface Gi1/0/1
channel-group 1 mode active
exit
!
interface Gi1/0/2
channel-group 1 mode active
exit
!
interface port-channel 1
switchport access vlan 10
exit
After connecting all cables, the port-channel does NOT work as expected. As part of the troubleshooting process, the technician examines the "show lldp"
displayed:
What is the most likely cause for the issue on the port-channel?

Refer to the output from a Dell N-Series switch:
A technician checks the connectivity to the default gateway from the switch and notices the ping fails.
At which layer does the problem exist?

A Dell N2024 switch receives a frame from a directly connected host. The switch learns that the source MAC address is NOT present in the MAC address table.
The destination address is present in the MAC address table.
What does the switch do with the frame?

Which switch should Spanning Tree Protocol choose to become the root bridge in the election process?