Cisco Troubleshooting Cisco IP Telephony and Video (CTCOLLAB)

Which Cisco ASA feature enables the ASA to do these two things? 1) Act as a proxy for the server and generate a SYN-ACK response to the client SYN request. 2) When the Cisco ASA receives an ACK back from the client, the Cisco ASA authenticates the client and allows the connection to the server.

Which option is not supported when the Cisco ASA is operating in transparent mode and also is using multiple security contexts?

Which Cisco ASA feature is implemented by the ip verify reverse-path interface interface_name command?

In one custom dynamic application, the inside client connects to an outside server using TCP port 4444 and negotiates return client traffic in the port range of 5000 to 5500. The server then starts streaming UDP data to the client on the negotiated port in the specified range. Which Cisco ASA feature or command supports this custom dynamic application?

A Cisco ASA is operating in transparent firewall mode, but the MAC address table of the Cisco ASA is always empty, which causes connectivity issues. What should you verify to troubleshoot this issue?

When active/active failover is implemented on the Cisco ASA, how many failover groups are supported on the Cisco ASA?

Which Cisco ASA CLI command is used to enable HTTPS (Cisco ASDM) access from any inside host on the 10.1.16.0/20 subnet?

What is the first configuration step when using Cisco ASDM to configure a new Layer 3/4 inspection policy on the Cisco ASA?

Which feature is not supported on the Cisco ASA 5505 with the Security Plus license?

With Cisco ASA active/standby failover, by default, how many monitored interface failures will cause failover to occur?