Cisco MPLS Implementing Cisco MPLS Set 4

1.

For which purpose is the Cisco ASA CLI command aaa authentication match used?

If at least one RD attached to the VPNv4 route matches at least one important RD configured in the VRF. If at least one RT attached to the VPNv4 route matches at least one important RT configured in the VRF. If at least one RD attached to the VPNv4 route matches at least one export RD configured in the VRF. If at least one RT attached to the VPNv4 route matches at least one export RT configured in the VRF.

2.

On the Cisco ASA Software Version 8.3 and later, which type of NAT configuration can be used to translate the source and destination IP addresses of the packet?

If at least one RD attached to the VPNv4 route matches at least one import RD configured in the VRF If at least one RT attached to the VPNv4 route matches at least one import RT configured in the VRF If at least one RD attached to the VPNv4 route matches at least one export RD configured in the VRF If at least one RT attached to the VPNv4 route matches at least one export RT configured in the VRF

3.

Which option is one requirement before a Cisco ASA appliance can be upgraded from Cisco ASA Software Version 8.2 to 8.3?

applies a route map for setting the SOO applies a route map for setting the Down Bit applies a route map for setting the Routing Bit applies a route map for setting the RD applies a route map for setting the RT

4.

Which statement about the Cisco ASA botnet traffic filter is true?

RD Interface Import RT. Export RT.

5.

Which statement about static or default route on the Cisco ASA appliance is true?

Route targets are prepended to each entry in the VRF to identify which VPN owns the route. Route targets are prepended to the customer's IP address to create unique address spacing for each VPN. Every customer route exported from a VRF is tagged with appropriate export route targets. VPN routesreceived by a PE-router are matched against import route targets configured in a CRF. Every customer route received from the CE is matched against import route targets. If there is match, theroute is added to the VRF. Every route received from the neighbor PE-router is entered in the VRF. It is then
matched against export route targets.

6.

Which configuration step is the first to enable PIM-SM on the Cisco ASA appliance?

When the network only supports MPLS VPNs. When the network is using OSPF or ISIS instead of I-BGP as the network IGP. When you want to reduce the number of labels that the P-router needs to store. When you want to reduce the number of routes that the P-routers must store in their global BGP routingtable.

7.

In the default global policy, which traffic is matched for inspections by default?

VPN routes are always imported an exported using MP-BGP. This router is configured improperly. BGP is not needed in this configuration. This router is configured improperly E-BGP is the required routing protocol between PE and CE-routers. BGP should be configured on all routers supporting MPLS to ensure backward-compatibility reasons forearlier versions of IOS.

8.

Which option lists the main tasks in the correct order to configure a new Layer 3 and 4 inspection policy on the Cisco ASA appliance using the Cisco ASDM Configuration > Firewall > Service Policy Rules pane?

PE-1 only PE-IG only PE-1 and PE-IG PE-1 and CE-2

9.

What is the default topology type for a GET VPN?

VNPv4 Address Route tag Label used for VPN packet forwarding Mandatory BGP attributes like As-Path and Next-Hop Route target

10.

In a spoke-to-spoke DMVPN topology, which type of interface does a branch router require?

Tag field. Down bit. Time To Live field Site of Origin field

Cisco MPLS Implementing Cisco MPLS Set 4

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco MPLS Implementing Cisco MPLS Set 4

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner