Cisco MPLS Implementing Cisco MPLS Set 2

Question - 15 Maximum mark : - 27

Home
All Exams
Cisco MPLS Implementing Cisco MPLS Online Mock Tests
Cisco MPLS Implementing Cisco MPLS Set 2

In one custom dynamic application, the inside client connects to an outside server using TCP port 4444 and negotiates return client traffic in the port range of 5000 to 5500. The server then starts streaming UDP data to the client on the negotiated port in the specified range. Which Cisco ASA feature or command supports this custom dynamic application?

Route summarization will cause every LSR along the LSP to perform a routing lookup. ✘ Route summarization will help reduce the size of the LIB and LFIB and will not affect MPLS label switchingoperations. ✘ Route summarization will cause the P router (LSR) that performs the route summarization to perform PHP(penultimate-hop popping). ✘ Route summarization will break an LSP into two segments, and the P router (LSR) that performs the routesummarization will need to perform a routing lookup. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

A Cisco ASA is operating in transparent firewall mode, but the MAC address table of the Cisco ASA is always empty, which causes connectivity issues. What should you verify to troubleshoot this issue?

Routing protocol contexts are specified in the MPLS RFC as OSPF, BGP, and ISIS. ✘ It is how separate isolated copies of VPN routing instances are created by the IOS. ✘ It is the interface parameters and timers values used to determine which routes are exported. ✘ It is the display keyword used with the show ip route vpnv4 command to display the routing protocolparameters for a particular VRF ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

When active/active failover is implemented on the Cisco ASA, how many failover groups are supported on the Cisco ASA?

The P-router is not MPLS VPN aware. ✘ The P-router forwards packets based upon the RT contained in the label. ✘ The P-router perceives the end-to-end MPLS VPN routing as an extension of its own IGP routing. ✘ The P-router provides separate routing instances for its own IGP and the end-to-end MPLS VPN routing. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which Cisco ASA CLI command is used to enable HTTPS (Cisco ASDM) access from any inside host on the 10.1.16.0/20 subnet?

The P-router has a single global routing table. ✘ A P-router has one routing table for each VRF. ✘ A P-router has a global routing table for each VRF. ✘ A P-router has a global routing table and one additional routing table for each VRF. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

What is the first configuration step when using Cisco ASDM to configure a new Layer 3/4 inspection policy on the Cisco ASA?

LDP is used to exchange customer routes across the P-network-. ✘ IBGP is used to exchange customer routes across the P-network. ✘ OSPF is used to exchange customer routes across the P-network. ✘ MP-BGP is used to exchange customer routes across the P-network. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which feature is not supported on the Cisco ASA 5505 with the Security Plus license?

The TTL field in the MPLS header is set to 255. This field is decremented at each hop in the MPLS cloud. If
the TTL has not expired, its value is copied back into the IP header. ✘ The TTL field in the IP header is copied to the TTL field in the MPLS header. This field is passedtransparently through the MPLS cloud. The TTL value is copied back into the IP header. ✘ The TTL field in the IP header is copied to the TTL field in the MPLS header. This field is decremented byone in the MPLS cloud. If the TTL has not expired its value is copies back into the IP header. ✘ The TTL field in the IP header is copied to the TTL field in the MPLS header. This field is decremented ateach hop in the MPLS cloud. If the TTL has not expired, its value is copied back into the IP header. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

With Cisco ASA active/standby failover, by default, how many monitored interface failures will cause failover to occur?

packet plane ✘ control plane ✘ routing plane ✘ forwarding plane ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which statement about SNMP support on the Cisco ASA appliance is true?

A process run on the ingress router that assigns the label to the packet. ✘ A process run on the P-router that removes a label before forwarding the packet to the egress router. ✘ A process run the ingress router that sets the TTL value to 255 to hide the core routers from a traceroute. ✘ A process run on the egress router that pops (sets) the TTL value in the Layer 3 header to the value that iscontained in the top label TTL value. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which command option/keyword in Cisco ASA 8.3 NAT configurations makes the NAT policy interface independent?

89, 71, Certkiller 5 ✘ 71, 89, Certkiller 5 ✘ 89,23, Certkiller 4 ✘ 71,23, Certkiller 4 ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

10.

On Cisco ASA Software Version 8.4.1 and later, when you configure the Cisco ASA appliance in transparent firewall mode, how is the Cisco ASA management IP address configured?

Penultimate hop popping (PHP) on the LDP label is performed by the egress PE router. ✘ Penultimate hop popping (PHP) on the VPN label is performed by the second P router. ✘ Penultimate hop popping (PHP) on the VPN label is performed to egress PE router. ✘ Penultimate hop popping (PHP) on the LDP label is performed by the second P router. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Prev Next

Congratulations

you have successfully completed the test

Back to Question View Result

Detail Form

We will send your result on your email id and phone no. please fill detail

Name

Email ID Note: Report will be send to the above Email ID

Phone No

Cisco MPLS Implementing Cisco MPLS Set 2

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner