Cisco Introducing Cisco Data Center Networking Set 1

1.

Which four issues are often detected when validating workflows in Cisco UCS Director? (Choose four.)

Only multicast traffic will be limited to 50% of the interface's bandwidth

Only broadcast traffic will be limited to 30% of the interface's bandwidth

Broadcast traffic will be limited to 30% of the interface's bandwidth, and multicast traffic will be limited to 50% of the interface's bandwidth

The combined total of broadcast and multicast traffic will be limited to 50% of the interface's bandwidth

2.

Which mechanism is used to find latent failure in memory modules?

after three seconds without any hello packets form the active router after 10 seconds without any hello packets from the active router after a priority value less than 100 is configured on the standby router after a priority value greater than 100 is configured on the standby router

3.

Which vCenter authentication service secures the VMware Cloud infrastructure platform?

every three seconds every 10 seconds every 30 seconds every 60 seconds

4.

Which is the step to associate an application profile EPG to a VMM domain?

NPV mode does not support Telnet NPV mode can be enabled only through a console connection Enabling NPV mode erases the current configuration and reboots the switch NPV mode consumes processor resources to convert the configuration file

5.

What does the Auto Deploy function of an ESXi host rely on?

feature npv feature npv switchport mode f switchport mode np

6.

An administrator is installing a hypervisor and has provisioned a dedicated LAN connectivity, set the boot order, and is now rebooting the server to start installation. Which method is the administrator using to install the hypervisor?

The domain ID is 20 NPV is configured on SwitchA NPIV is configured on SwitchA Only one device has joined to the fabric via the fc1/2 port of SwitchA

7.

Which option describes a function of a target in Storage Area Networking?

an FCID a WWNN a WWPN a domain ID

8.

The Cisco UCS usNIC feature improves performance of software applications by bypassing the kernel network stack. Which option lists the steps to configure usNIC capable vNIC in the correct order?

one two three four

9.

Which option describes the function of an initiator in Storage Area Networking?

IEEE 803.2 Standard IEEE 803.2 Extended IEEE Registered Name IEEE Extended Registered Name

10.

A Cisco UCS Director administrator is charging the boot . Which option lists the steps that accomplish this task?

0x 13 a1

Cisco Introducing Cisco Data Center Networking Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco Introducing Cisco Data Center Networking Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner