Cisco Implementing Cisco Unified Communications Manager, Part 1 v8.0 (CIPT1 v8.0) Set 1

1.

Which technology helps to determine the average UDP latency between two places in the network?

MAC address, device pool, and phone button template MAC address, user profile, phone security profile, and phone button template MAC address, device pool, phone security profile, and phone button template MAC address, device profile, user security profile, and phone button template

2.

Which Cisco onePK SDK function prints user-friendly error messages?

CDP DNS DHCP TFTP Option 150

3.

You are responsible for deploying a Cisco onePK designed network infrastructure. Which four options are Cisco recommended best practices when defining naming conventions? (Choose four).

The IP phones will automatically register with the new primary server. The IP phones will need to be reset so that a new configuration file can be downloaded from the TFTP server. The primary Cisco Unified Communications Manager server automatically pushes a new configuration file to the IP phones in the affected device pool. The device pools will need to be edited so that the new Cisco Unified Communications Manager group information is applied to the appropriate device pools.

4.

When a subnet is configured as "private subnet" within a bridge domain, what is the desired behavior for the subnet?

Cisco Unified Communications Manager Auto-Register Phone Tool is part of Bulk Administration. Cisco Unified Communications Manager BAT needs to be installed from the plug-in page. Cisco Unified Communications Manager BAT pages are available from the Serviceability page. Cisco Unified Communications Manager Auto-Register Phone Tool requires a Customer Response System.

5.

An ACI fabric is being connected to an existing switch network. Which spanning tree protocol must be configured to enable flooding in the native VLAN to ensure a loop-free topology?

Device Pool

Device Settings > Device Defaults

Device Settings > Firmware Load Information

Device Settings > Default Device Profile Configuration

Device Settings > Device Profile

6.

Which option is the default mode for policy propagation to leaf switches?

The Cisco Unified Communications Manager group is configured in the publisher to designate the primary, secondary, and tertiary servers in the group. Each IP phone is configured with a Cisco Unified Communications Manager group that determines which server the IP phone will use as its primary, secondary,and tertiary server. Each IP phone is configured with its primary, secondary, and tertiary server. The Cisco Unified Communications Manager group is configured in the publisher to designate the IP phone groups that will register with the primary, secondary,and tertiary servers in the group.

7.

Which option is a valid connection for the fabric port on a leaf switch?

Configure Phone NTP References in Cisco Unified CM Administration. Configure the NTP server in Cisco Unified OS Administration Configure the NTP server in Cisco Unified CM Administration. Configure time in Cisco Unified OS Administration. Restart the Unified Communications Manager services for the publisher and subscribers on the Unified CallManager Serviceability page

8.

Which option lists the correct steps in the correct order that are needed to enable MP-BGP in within ACI fabric?

A dummy MAC address is entered for each phone in the CSV file. The MAC address is left blank in the CSV file and Cisco Unified Communications Manager BAT imports the CSV file with the Create Dummy MAC Addressoption selected. When the CSV file is created, the Create Dummy MAC Address option must be selected before the file is uploaded into the Cisco Unified CommunicationsManager BAT tool. The MAC address is left blank in the CSV file and Cisco Unified Communications Manager BAT queries the Cisco Unified Communications Manager devicedatabase for the MAC address that matches the extension created in the CSV file.

9.

To create a vPC domain in the Cisco APIC UI, which information must be configured in the vPC explicit protection group?

MoH Cisco IP Phone service soft key template Annunciator MTP

10.

Where is flooding behavior defined?

Must enabled on dedicated server Only on one node Enable on gatekeeper Enable on the server which TFTP also need to be enable

Cisco Implementing Cisco Unified Communications Manager, Part 1 v8.0 (CIPT1 v8.0) Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco Implementing Cisco Unified Communications Manager, Part 1 v8.0 (CIPT1 v8.0) Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner