Cisco Implementing Cisco TelePresence Installations (ITI) Set 2

select a bright color that draws attention ✘ select white so everything stands out in front of it ✘ select the darkest colors so the plasmas will render other colors more accurately ✘ select neutral tones to give the appearance of warmth without too much distraction ✔

Four black plastic screws on top of the camera assembly secure the camera cover ✘ The cameras are set up correctly when images are centered, in focus on the display screens, and the whitebalance is configured ✘ The camera cluster needs to be secured to the frame after leveling screw down the center screw m theback of the camera cluster to secure it to the frame ✘ To configure the camera property, the camera cluster need not be perfectly level, because you can leveleach camera separately ✔

The system has a built-in embedded microphone array. ✘ The system supports life-size images on the display. ✘ The system has a built-in facade lighting control ✘ The system has two embedded speakers to support wideband audio ✔

a high-definition video-conferencing system ✘ a high-definition video system installed in a studio-quality conference room ✘ a high-definition video system with spatial audio installed in a studio-quality conference room ✘ a technology that allows people who are miles apart to feel like they are in the same room ✔ a technology that allows a large group of people to experience video conferencing ✔

The system supports four participants on each side around a virtual table for up to eight participants in a point-to-point meeting ✘ The system is designed to be flush-mounted along a wall space to easy use in smaller footprint areas ✘ The system is designed to be a free-standing system when purchased with the optional pedestal base ✘ The system uses the same frame and assembly structure that is used in the Cisco TelePresence System1300 ✔

Configuration > Hardware Setup > Cameras and click Start

✘

Hardware Setup > Configuration > Cameras and click Start

✘

Troubleshooting > Hardware Setup > Cameras and click Start

✘

Configuration > Troubleshooting > Cameras and click Start

✔

15 feet wide by 13 feet deep ✘ 18 feet wide by 13 feet deep ✘ 19 feet wide by 13 feet deep ✘ 23 feet wide by 13 feet deep ✔

The green rectangle on the display is aligned with the small target ✘ The green rectangle on the display is aligned with the large target ✘ The red rectangle on the display is aligned with the small target ✘ The red and green bars must be the exact same length for proper calibration ✔ It does not matter which target is aligned with which rectangle as long as each rectangle is aligned with oneof the targets ✔

The ACU cannot be used with the Cisco Telepresence System 1000 because it is not a supported device. ✘ The HFR codec cannot be used with the Cisco Telepresence System 1000 because it is not supported and(here is no location to mount it) ✘ The ACU, the External Presentation display, and the HFR codec are supported with the CiscoTelePresence System 1000 ✘ The Cisco TelePresence System 1000 does not support External Presentation displays because it supportsPresentation in Picture ✔

TFTP ✘ SFTP ✘ HTTP ✘ HTTPS ✔