Cisco Implementing Cisco Secure Mobility Solutions (SIMOS) Set 7

The hub sends back a resolution reply to the requesting spoke. ✘ The hub updates its own NHRP mapping. ✘ The hub forwards the request to the destination spoke. ✘ The hub waits for the second spoke to send a request so that it can respond to both spokes. ✔

Create another DMVPN cloud by configuring another tunnel interface that is sourced from the second ISP link. ✘ Use another router at the spoke site, because two ISP connections on the same router for the same hub is not allowed. ✘ Configure SLA tracking, and when the primary interface goes down, manually change the tunnel source of the tunnel interface. ✘ Create another tunnel interface with same configuration except the tunnel source, and configure the if-state nhrp and backup interface commands on the
primary tunnel interface. ✔

Next Hop Resolution Protocol ✘ Next Hop Registration Protocol ✘ Next Hub Routing Protocol ✘ Next Hop Routing Protocol ✔

Verify the trusted zone and cookies settings in your browser. ✘ Make sure that you specified the URL correctly. ✘ Try the URL from another operating system. ✘ Move to the IPsec client. ✔

HIPPA DES ✘ AES-CBC-128 ✘ RC4-128 ✘ AES-GCM-256 ✔

aes-cbc-192, sha256, group 14 ✘ 3des, md5, group 7 ✘ 3des, sha1, group 1 ✘ aes-cbc-128, sha, group 5 ✔

clear configure crypto ✘ clear configure crypto ipsec ✘ clear crypto map ✘ clear crypto ikev2 sa ✔

group 10 ✘ group 24 ✘ group 5 ✘ group 20 ✔

1160 bytes ✘ 1260 bytes ✘ 1360 bytes ✘ 1240 bytes ✔

ESP ✘ dynamic routing ✘ NHRP ✘ CEF ✔ IPSec ✔