Cisco Implementing Cisco Secure Mobility Solutions (SIMOS) Set 2

1.

Which option is one requirement before a Cisco ASA appliance can be upgraded from Cisco ASA Software Version 8.2 to 8.3?

Remove all the pre 8.3 NAT configurations in the startup configuration. Upgrade the memory on the Cisco ASA appliance to meet the memory requirement of Cisco ASA Software Version 8.3. Request new Cisco ASA licenses to meet the 8.3 licensing requirement. Upgrade Cisco ASDM to version 6.2. Migrate interface ACL configurations to include interface and global ACLs.

2.

Which statement about the Cisco ASA botnet traffic filter is true?

The four threat levels are low, moderate, high, and very high. By default, the dynamic-filter drop blacklist interface outside command drops traffic with a threat level of high or very high. Static blacklist entries always have a very high threat level. A static or dynamic blacklist entry always takes precedence over the static whitelist entry.

3.

Which statement about static or default route on the Cisco ASA appliance is true?

The admin distance is 1 by default. From the show route output, the [120/3] indicates an admin distance of 3. A default route is specified using the 0.0.0.0 255.255.255.255 address/mask combination. The tunneled command option is used to enable route tracking. The interface-name parameter in the route command is an optional parameter if the static route points to the next-hop router IP address.

4.

Which configuration step is the first to enable PIM-SM on the Cisco ASA appliance?

Configure the static RP IP address. Enable IGMP forwarding on the required interface(s). Add the required static mroute(s). Enable multicast routing globally on the Cisco ASA appliance. Configure the Cisco ASA appliance to join the required multicast groups.

5.

In the default global policy, which traffic is matched for inspections by default?

match any match default-inspection-traffic match access-list match port match class-default

6.

Which option lists the main tasks in the correct order to configure a new Layer 3 and 4 inspection policy on the Cisco ASA appliance using the Cisco ASDM Configuration > Firewall > Service Policy Rules pane?

1. Create a class map to identify which traffic to match. 2. Create a policy map and apply action(s) to the traffic class(es). 3. Apply the policy map to an interface or globally using a service policy. 1. Create a service policy rule.2. Identify which traffic to match. 3. Apply action(s) to the traffic. 1. Create a Layer 3 and 4 type inspect policy map.2. Create class map(s) within the policy map to identify which traffic to match. 3. Apply the policy map to an interface or globally using a service policy. 1. Identify which traffic to match.2. Apply action(s) to the traffic. 3. Create a policy map. 4. Apply the policy map to an interface or globally using a service policy.

7.

What is the default topology type for a GET VPN?

point-to-point hub-and-spoke full mesh on-demand spoke-to-spoke

8.

In a spoke-to-spoke DMVPN topology, which type of interface does a branch router require?

Virtual tunnel interface Multipoint GRE interface Point-to-point GRE interface Loopback interface

9.

A network is configured to allow clientless access to resources inside the network. Which feature must be enabled and configured to allow SSH applications to respond on the specified port 8889?

auto applet download port forwarding web-type ACL HTTP proxy

10.

Consider this scenario. When users attempt to connect via a Cisco AnyConnect VPN session, the certificate has changed and the connection fails. What is a possible cause of the connection failure?

An invalid modulus was used to generate the initial key. The VPN is using an expired certificate. The Cisco ASA appliance was reloaded. The Trusted Root Store is configured incorrectly.

Cisco Implementing Cisco Secure Mobility Solutions (SIMOS) Set 2

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco Implementing Cisco Secure Mobility Solutions (SIMOS) Set 2

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner