Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) Set 2

Question - 15 Maximum mark : - 30

Home
All Exams
Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) Online Mock Tests
Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) Set 2

When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully?

dial peers that address all sites in the multisite cluster ✘ translation patterns that apply to the local PSTN for each gateway ✘ incoming and outgoing COR lists ✘ configuration of the gateway as an MGCP gateway ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

What component acts as a user agent for both ends of a SIP call while Cisco Unified SIP SRST is providing failover during a WAN outage?

B2BUA ✘ SIP server ✘ SIP proxy ✘ SIP SRST router ✔ SIP registrar ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which method can be used to address variable-length dial plans?

Overlap sending and receiving. ✘ Add a prefix for all calls that are longer than 10-digits long ✘ Use nested translation patterns to eliminate inter-digit timeout ✘ Use the @macro on the route pattern ✔ Use MGCP gateways, which support variable-length dial plans ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway. What should the gateway type be?

H.323 gateway ✘ Cisco 3825 ✘ Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected. ✘ The gateway can be added either as an H.323 gateway or Cisco 3800 series router. ✔ The gateway can be added either as an H.323 gateway or Cisco 3825 series router. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which statement best describes globalized call routing in Cisco Unified Communications Manager?

All incoming calling numbers on the phones are displayed as an E.164 with the + prefix. ✘ Call routing is based on numbers represented as an E.164 with the + prefix format. ✘ All called numbers sent out to the PSTN are in E.164 with the + prefix format. ✘ The CSS of all phones contain partitions assigned to route patterns that are in global format. ✔ All phone directory numbers are configured as an E.164 with the + prefix. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

When an incoming PSTN call arrives at an MGCP gateway, how does the calling number get normalized to a global E.164 number with the + prefix in Cisco Unified Communications Manager?

Normalization is done using translation patterns. ✘ Normalization is done using route patterns. ✘ Normalization is done using the gateway incoming called party prefixes based on number type. ✘ Normalization is done using the gateway incoming calling party prefixes based on number type. ✔ Normalization is achieved by local route group that is assigned to the MGCP gateway. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager?

Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway. ✘ Normalization is done using route patterns. ✘ Normalization is done using the gateway incoming called party prefixes based on number type. ✘ Normalization is done using the gateway incoming calling party prefixes based on number type. ✔ Normalization is achieved by local route group that is assigned to the MGCP gateway. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP phone so that users see the calling number in a local format?

Calling number localization is done using translation patterns. ✘ Calling number localization is done using route patterns. ✘ Calling number localization is done by configuring a calling party transformation CSS at the phone. ✘ Calling number localization is done by configuring a calling party transformation CSS at the gateway. ✔ Calling number localization is done by configuring the phone directory number in a localized format. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?

Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI. ✘ In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by themain number digits in the international route patterns. ✘ Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and1 followed by the main number for the international route patterns. ✘ In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digitnumber for domestic calls and sent out in its entirety for international calls. ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

10.

Which trunk should you use in an H.323 gatekeeper-controlled network?

H.323 ✘ H.225 ✘ SIP ✘ Intercluster ✔ MGCP FXO trunk ✔

Answer & Solution Discuss in Board Save for Later

Answer & Solution

Answer: Option B

Solution:

It provides fallback for IE8.

Prev Next

Congratulations

you have successfully completed the test

Back to Question View Result

Detail Form

We will send your result on your email id and phone no. please fill detail

Name

Email ID Note: Report will be send to the above Email ID

Phone No

Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) Set 2

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner