Cisco Deploying Cisco Service Provider Network Routing (SPROUTE) Set 1

1.

Routes that are received from an IBGP peer will be propagated to which other routers by default?

to the EBGP peers only to the IBGP peers only to both EBGP and IBGP peers to no other peers

2.

When monitoring the OSPF operations in the network, you notice that the OSPF process is not load balancing traffic across multiple OSPF links. Which configuration adjustment could be made to enable the OSPF process to load balance traffic across multiple OSPF links?

Enable BFD on the OSPF interfaces and on the OSPF routing process. Enable NSR on the OSPF routing process. Enable NSF on the OSPF routing process. Adjust the OSPF cost on the OSPF interfaces. Adjust the OSPF variance parameter.

3.

Which of the following is used by an IS-IS router to detect other IS-IS neighbor routers and to form adjacencies?

ESH ISH IIH PSNP CSNP

4.

How many total OSPF virtual links are configured in this multiarea OSPF network which supports both OSPFv2 and OSPFv3 for IPv4 and IPv6 routing?

1 2 3 4

5.

When implementing LDP, what is liberal label retention mode?

To reduce the convergence time, the LSR will retain all the received labels in its LIB even if all the neighbor LSRs go down temporary The LSR can assign it's own label for each destination network even though it has not been assigned a next hop label from the neighbor LSR The LSR will store the label received from the downstream LSRs in its LIB even if the downstream LSRs are not the next hop for the destination The LSR will not perform PHP if it is operating in liberal label retention mode

6.

What is function of the RP/0/RSP0/CPU0:PE1(config-ospf)#distance Cisco IOS-XR command?

To modify the administrative distance of the OSPF routes To modify the default seed metric of the OSPF external routes To modify the OSPF default reference bandwidth To modify the OSPF cost

7.

Which four statements are correct regarding IS-IS operations? (Choose four.)

By default, Level 1 routers within an IS-IS area do not carry any routing information external to the area to which they belong. They use a default route to exit the area. Cisco IOS XR Software supports multitopology for IPv6 IS-IS unless single topology is explicitly configured in IPv6 address-family configuration mode.Real 5 Cisco 642-883 Exam IS-IS supports "route leaking" in which selected Level 2 routes can be advertised by a Level 1/Level 2 router into Level 1. The IS-IS backbone is a contiguous collection of Level 1 capable routers, each of which can be in a different area. With IS-IS, an individual router is in only one area, and the border between areas is on the link that connects two routers that are in different areas.

8.

In comparing IS-IS with OSPF, a Level-1-2 IS-IS router is similar to which kind of OSPF router?

ASBR on a normal OSPF area ASBR on NSSA ABR on totally stubby OSPF area ABR on stubby OSPF area ABR on a normal OSPF area

9.

Which statement Is correct regarding the DR election process In this OSPF implementation?

Both the CE5 and PE6 routers are DROTHERs PE5 is the OSPFv2 DR for the GigabitEthernet link between PE5 and PE6 PE6 is the OSPFv2 and OSPFv3 DR for the GigabitEthernet link between PE5 and PE6 PE6 is the DR for the GigabitEthernet link between PE5 and PE6 because it has a higher OSPF priority

10.

Which router(s) is/are IS-Type L1/L2 IS-IS router?

CE5 only PE6 only CE5 and PE6 only PE5 and PE6 only CE5, PE5 and PE6

Cisco Deploying Cisco Service Provider Network Routing (SPROUTE) Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco Deploying Cisco Service Provider Network Routing (SPROUTE) Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner