×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
Which multicast group range is reserved for SSM?
2.
Which four statements are correct regarding MSDP configurations and operations? (Choose four.)
3.
Assume that the R1 router is enabled for PIM-SM and receives a multicast packet sourced from 172.16.1.100, and the R1 router has multicast receivers on the Gi0/1, Gi0/2, Gi0/3 and Gi0/4 interfaces. The multicast packet from the 172.16.1.100 source must arrive on which interface on the R1 router for it to be forwarded out the other interfaces?
4.
The bsr-border router PIM interface configuration command is used for what purpose?
5.
When implementing Anycast RP, the RPs are also required to establish which kind of peering with each other?
6.
What must occur before an (S,G) entry can be populated in the multicast routing table?
7.
Which field in the IPv6 header can be used to set the DSCP value?
8.
Which mechanism is used by an IPv6 multicast receiver to join an IPv6 multicast group?
9.
Which of the following can be used by dual-stack service providers supporting IPv4/IPv6 customers with dual-stack hosts using public IPv6 addresses and private IPv4 addresses?
10.
Which IPv6 mechanism occurs between a provider edge router and the customer premises equipment router to allow an ISP to automate the process of assigning a block of IPv6 addresses to a customer for use within the customer network?