Cisco Deploying Cisco ASA Firewall Solutions (FIREWALL v1.0) Set 1

In one custom dynamic application, the inside client connects to an outside server using TCP port 4444 and negotiates return client traffic in the port range of 5000 to 5500. The server then starts streaming UDP data to the client on the negotiated port in the specified range. Which Cisco ASA feature or command supports this custom dynamic application?

A Cisco ASA is operating in transparent firewall mode, but the MAC address table of the Cisco ASA is always empty, which causes connectivity issues. What should you verify to troubleshoot this issue?

Which Cisco ASA show command groups the xiates and connections information together in its output?

By default, how does the Cisco ASA authenticate itself to the Cisco ASDM users?

On Cisco ASA version 8.2, which four inspections are enabled by default in the global_policy? (Choose four.)

Which flag shown in the output of the show conn command is used to indicate that an initial SYN packet is from the outside (lower security-level interface)?

Using the default modular policy framework global configuration on the Cisco ASA, how does the Cisco ASA process outbound HTTP traffic?

If an Asa is configured with overlapping Nat/Pat rules, The ASA will apply the rules in a specific order. What rule will be applied first ?

When will a Cisco ASA that is operating in transparent firewall mode perform a routing table lookup instead of a MAC address table lookup to determine the outgoing interface of a packet?

By default, which access rule is applied inbound to the inside interface?