Cisco Composite

1.

Based on the P1R3 show ip bgp output, which statement is true?

The best path to reach the 192.168.11.0 prefix is via 10.200.200.11. The best path to reach the 192.168.11.0 prefix is via 10.200.200.12. The best path to reach the 192.168.11.0 prefix is via both 10.200.200.11 and 10.200.200.12; BGP willautomatically load balance between the two. The 192.168.11.0 and 192.168.12.0 prefixes were learned via EBGP from the 10.200.200.11 and10.200.200.12 EBGP neighbors.

2.

A network administrator is troubleshooting a route redistribution configuration between EIGRP 100 and OSPF 1. Currently, some of the networks, such as network 10.1.1.0/24 and network 10.2.2.0/24 within the EIGRP domain are not being redistributed into OSPF 1. Given the above configuration, what is the problem?

The redistribute command should specify metric-type 2. The redistribute command is missing the subnets option. The redistribute command should be configured under eigrp 100. The redistribute command should use an EIGRP compatible metric value such as 64 1000 100 1 1500.

3.

What is the cause of jitter?

variable queue delays packet drops transmitting too many small packets compression

4.

Which statement is true about the STP Path Cost on a particular port?

It is known only to the local switch where the port resides. It can be modified to help determine Root Bridge selection. Modifying it can cause TCN BPDU to be sent to the Root Bridge. When increased, it can provide higher bandwidth to a connecting port.

5.

What is the purpose of the eigrp stub configuration command?

to increase scalability by limiting the EIGRP query range to reduce the size of the routing table by blocking the D EX (External EIGRP) routes into the EIGRP stubrouter to reduce the convergence time by enabling the EIGRP stub router to propagate the EIGRP queries fromthe EIGRP hub router to reduce the convergence time by enabling the EIGRP stub router to also perform query requests to theEIGRP hub router

6.

Which IS-IS NET represents a locally administered private address?

39.0040.0010.0c99.1112.00 45.0004.0000.0d35.4554.00 47.0010.0000.0a11.3564.00 49.0001.0000.0c12.3456.00

7.

Which statement is true concerning 6to4 tunneling?

IPv4 traffic is encapsulated with an IPv6 header. The edge routers can use any locally configured IPv6 address. Hosts and routers inside a 6to4 site will need a special code. An edge router must use IPv6 address of 2002::/16 in its prefix.

8.

Which statement is true about 802.1x port-based authentication?

Hosts are required to have a 802.1x authentication client or utilize PPPoE. Before transmitting data, an 802.1x host must determine the authorization state of the switch. RADIUS is the only supported authentication server type. TACACS+ is the only supported authentication server type. If a host initiates the authentication process and does not receive a response, it assumes it is notauthorized.

9.

Which packet type is used to acknowledge LSPs on point-to-point links and to request missing pieces of information in the IS-IS link-state database?

complete SNP (CSNP) partial SNP (PSNP) hello database query database description packet (DDP)

10.

Which statement best describes autoconfiguration for IPv6?

A router connected to the local link sends a broadcast periodically to advertise the subnet and the host appends its locally configured IPv4 address to create a unique IPv6 address. A router connected to the local link sends its 64 bit prefix address and the host appends its MAC address tocreate its unique IPv6 address. A host will contact its local router to receive its unique IPv6 address. The local DHCP server will detect a new host has been added to the LAN segment and automatically senda unique IPv6 address to the new host.

Cisco Composite

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco Composite

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner