×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
What is the configuration for interface vEthernet 349, given the following output?
CiscoNexus1000V# show run port-profile production-608
port-profile type vEthernet production-608
vmware port-group
switchport mode access
switchport access vlan 608
no shutdown
state enabled
CiscoNexus1000V# show run port-profile vm
port-profile type vEthernet production-608
vmware port-group
switchport mode access
switchport access vlan 952
no shutdown
state enabled
CiscoNexus1000V# show run interface vEthernet 349
interface vEthernet 349
switchport access vlan 712
inherit port-profile production-608
description vm, Network Adapter 1
vmware dvport 43
port-profile type vEthernet production-608
vmware port-group
switchport mode access
switchport access vlan 608
no shutdown
state enabled
CiscoNexus1000V# show run port-profile vm
port-profile type vEthernet production-608
vmware port-group
switchport mode access
switchport access vlan 952
no shutdown
state enabled
CiscoNexus1000V# show run interface vEthernet 349
interface vEthernet 349
switchport access vlan 712
inherit port-profile production-608
description vm, Network Adapter 1
vmware dvport 43
2.
The data path feature in Cisco Nexus 1000V is provided by which component or components?
3.
How does a VEM initially communicate with a VSM after installation?
4.
On a Cisco Nexus 1000V, how many port channels can each VEM support?
5.
loops. Ensure that channel is configured on profile having multiple ports on VEM and no more than one channel
on VEM is carrying a particular VLAN.
The following log was observed in the Cisco Nexus 1000V "show logging log" output. Which option is the best solution to resolve the error that is indicated in the log?
2011 Dec 25 19:23:21 CiscoNexus1000V %VEM_MGR-SLOT9-2-VEM_SYSLOG_CRIT:
VLAN_MISCONFIG: Multiple uplinks/port-channels with common VLANs detected. This can cause packet2011 Dec 25 19:23:21 CiscoNexus1000V %VEM_MGR-SLOT9-2-VEM_SYSLOG_CRIT:
loops. Ensure that channel is configured on profile having multiple ports on VEM and no more than one channel
on VEM is carrying a particular VLAN.
6.
A new blade has failed to associate with a service profile. What is a likely reason for why the service profile association failed?
7.
Which tool is used to install an operating system on the blade of a Cisco UCS chassis?
8.
Which protocol does the Cisco UCS 2104 Fabric Extender use to communicate to the Cisco UCS 6120/6140 Fabric Interconnects?
9.
How should you configure the failover for the HBA on the service profile?
10.
UCS-A /chassis/server/memory-array/dimm # show stats memory-error-stats Memory Error Stats:
Time CollecteD. 2012-03-05T03:26:02.045
Monitored Object: sys/chassis-1/blade-2/board/memarray-1/mem-1
Suspect: No
Address Parity Errors: 0
Mismatch Errors: 0
Ecc Multibit Errors: 0
Ecc Singlebit Errors: 0
ThresholdeD. 0
Refer to the output.
Which counter would be the most likely cause for a server to crash?
Time CollecteD. 2012-03-05T03:26:02.045
Monitored Object: sys/chassis-1/blade-2/board/memarray-1/mem-1
Suspect: No
Address Parity Errors: 0
Mismatch Errors: 0
Ecc Multibit Errors: 0
Ecc Singlebit Errors: 0
ThresholdeD. 0
Refer to the output.
Which counter would be the most likely cause for a server to crash?