Cisco CDCNIS Cisco Data Center Networking Infrastructure Support Set 2

To create an EtherChannel only if a PAgP packet is received ✘ To place the interface in an EtherChannel if the connected interface is also in auto mode ✘ To create an EtherChannel ✘ To create an EtherChannel only if an LACP is received ✔

Associated with the physical FWSM ✘ Associated with VLAN groups that are associated with a single context ✘ Associated with VLAN groups that are associated with multiple contexts ✘ Directly associated with a single context ✔ Directly associated with multiple contexts ✔

The NAM can only capture DSCP data for voice traffic ✘ Use NetFlow on the NAM to capture DSCP-level protocol statistics ✘ Enable DiffServ monitoring using a user profile containing DiffServ aggregation groups ✘ Use a third-party application to parse upper-layer protocol data captured from web servers ✔

Log all traffic ✘ Log traffic between attacker and victim IP Addresses ✘ Capture packets to a local file ✘ Capture packets to a local file or remote analyzer ✔

Eliminates traffic capture for network 10.0.1.0/24 ✘ Allows devices on network 10.0.1.0/24 to manage the IDSM ✘ Is not a valid command ✘ Captures traffic from network 10.0.1.0/24 ✔

Send a request to block a connection ✘ Modify data in the packet ✘ Log packets containing the attacker and victim address pair ✘ Terminate the TCP flow ✔

BPDU guard ✘ Dynamic NAT and PAT ✘ Extended ACLs ✘ Ethertype ACLs ✔

No configuration is necessary ✘ Analysis module [mod_num] management-port access-vlan [vlan-di] ✘ Interface vlan [vlan_id]Analysis module [ mod_num] management-port ✘ The port cannot be configured ✔

Map the context to a class and apply resource limits to the context ✘ Map the context to a VLAN and apply resource limits to the VLAN ✘ Map the context to a class and apply resource limits to the class ✘ You can't limit the number of connections that are permitted in a context ✔

Create a second aaa-server entry and configure that server as standby ✘ Create an AAA server group and associate both RADIUS servers with the group ✘ Create an access list that allows traffic to the backup RADIUS server ✘ Create a virtual IP Address on the MSFC using HSRP ✔