×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
What is the result of a Cisco 1250 AP deployed for 802.11a/b/g/n using optimized power (16.8 W) with software version 7.0?
2.
Customer requirements and a WLAN site survey require a Cisco 1250 AP operating at full 802.11a/b/g/n located approximately 150 meters from the closest IDF.
What is the best solution to provide wireless coverage to this portion of the customer's facility?
What is the best solution to provide wireless coverage to this portion of the customer's facility?
3.
You have completed a site survey for a customer that refurbishes/remanufactures automobile engines. The site survey has determined that there are approximately 70 clients in the facility, but because of the large number of engines as many as 2500 RFID tags will need to be tracked through location services to provide historical location information and audit trails. The results of the site survey require 60 APs for data and location services. How many version 7.0 controller(s) will provide the most cost effective solution?
4.
You have a customer that is building a new campus of four 3-story buildings that you have just completed the site survey for. The customer is interested in the amount of rack space they will need to allocate in either the building MDF or in the data center for controllers. Each building is going to require 75 APs to support voice and data. How should the controllers be deployed to provide the least number of controllers, the highest redundancy, and the easiest management?
5.
How would clients react to a controller configuration that utilized unsupported channels?
6.
For better compatibility with 802.11n clients, which 802.11a channels should be utilized?
7.
When using WCS 7.0 to calibrate a floor, is it more important to collect 50 or more distinct locations or to collect 150+ measurements?
8.
In post-deployment testing you have identified an area where there is a substantial rate-shift issue causing problems with the existing Cisco 7921 phones. How might you resolve this issue?
9.
You have been asked to evaluate a deployed version 7.0 controller based WLAN, which includes a Cisco WCS and an MSE3310. Currently, the customer has a approximately 1900 clients and 300 RFID tags. The customer is complaining of problems tracking clients and RFID tags. What can be done to correct this problem?
10.
You have been asked to evaluate a new version 7.0 controller-based WLAN deployment. The customer wants to increase the number of indoor tags their network supports. How do you explain to the customer how wireless clients and RFID tags are licensed in the MSE?