Cisco CCIE Wireless Written Set 6

1.

Lun masking is a means by which Luns :

May be concatenated on a host May be concatenated on an array May be bound on a host Are only presented to a pre-defined initiator Is presented read-only

2.

What implementation would allow the switch to provide an end device with the same Fibre Channel Identifier across reboots of the MDS?

Static Domains Permanent Identifier Persistent Target Binding Persistent FCIDs Static FCIDs

3.

Assume you have a class 3 connection A switch port interface has 12 buffer credits.
If a host with 24 buffer credits logs into this port, how many buffer credits will be made available to this host to transmit to other Fibre channel devices logged into the same Fibre channel switch?

This is negotiated at FLOGI and depends on how many other devices this host is connecting to 12 credits will be set 24 credits will be set Not known - The host must first PLOGI to other Fibre Channel devices 3 credits will be set

4.

What is the function of the Link Reset Protocol within the Link Control Facility?

It is part of the LIP process It is used only for Class 1 connection removal It is used to arbitrate on a loop to recover from loss of sync It follows a Link Failure and controls NOS and LOS substates It follows a link timeout or connection error and controls LR and LRR substates

5.

What statement regarding LUN zoning is accurate?

LUN zoning is a standards based feature that can be used to connect to another switch while in interop
mode The MDS LUN zoning feature cannot be used when the LUN masking feature is used on a storagesubsystem When LUN 0 is not included within a zone, control traffic to LUN 0 (for example, REPORT_LUNS,INQUIRY) is still supported When LUN 0 is not included within a zone, data traffic to LUN 0 (for example,READ, WRITE) is still supported None of the above

6.

You are looking at a trace for FLOGI frame.
What would the value of the R_CTL Field be in the Frame header knowing that a FLOGI frame is an Extended
Link service request.

0x22 0x23 0x02 0x03 0x12

7.

What Fibre Channel header field indicates the frame is a Link Control frame?

R_CTL CS_CTL TYPE F_CTL DF_CTL

8.

What answer has the correct order of steps to configure QoS for Data Traffic?

Enable the QoS feature, create and define class maps, adjust DWRR weights if necessary, apply
configuration, create a policy map Enable the FCC feature, create and define class maps, create a policy map, apply the configuration, adjustDWRR weights if necessary Enable the QoS feature, create a policy map, create and define class maps, apply the configuration, AdjustDWRR weights if necessary Enable the FCC feature, create a policy map, create and define class maps, apply the configuration, AdjustDWRR weights if necessary Enable the QoS feature, create and define class maps, create a policy map, apply the configuration, adjustDWRR weights if necessary

9.

SCSI LUN discovery is triggered automatically when :

An IPS module is installed in an MDS switch A CSM module is installed in an MDS switch An ASM module is installed in an MDS switch 16 port FC Line card installed in an MDS switch The switch has dual supervisors

10.

You are connecting 2 independent and existing switches.
Switch one has a domain ID of 1, Switch 2 has a domain ID of 2.
An ISL is connected between the 2 switches Both switches support FSPF routing protocol During ISL initialization only ELP and ESC were exchanged before one of the switches crashed. What has NOT been exchanged?

WWN of the 2 switches Type of routing protocol that the switches support Trunking configuration of the ISL port Principal switch priority of the switches Flow control parameters for the 2 E_ports

Cisco CCIE Wireless Written Set 6

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco CCIE Wireless Written Set 6

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner