×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
A customer has existing production fabric with Brocade and McData FC switches intermixed. When adding an
MOS 9000 switch, what MDS interop mode would be required?
(Topology: McData6400 - (ISL) - Brocade12000 - (ISL) -- MDS)
MOS 9000 switch, what MDS interop mode would be required?
(Topology: McData6400 - (ISL) - Brocade12000 - (ISL) -- MDS)
2.
What term is used to identified the special characters used in Fiber Channel Encoding?
3.
role name guest
description Guest User Role
rule 1 deny config
rule 2 deny exec
rule 3 permit config feature zone
rule 4 permit config feature zoneset
rule 5 permit show
rule 6 permit exec feature fcping
rule 7 permit exec feature fctrace
rule 8 permit exec feature ips
rule 9 permit exec feature discover
rule 10 permit config feature ivr
rule 11 permit config feature ficon
rule 12 permit config feature fcip
rule 13 permit config feature in-order-guarantee
rule 14 permit config feature interface
rule 15 permit exec feature ping
rule 16 permit config feature vsan
vsan policy deny
permit vsan 10-19
What CLI command function will be permitted by the role name "guest"?
description Guest User Role
rule 1 deny config
rule 2 deny exec
rule 3 permit config feature zone
rule 4 permit config feature zoneset
rule 5 permit show
rule 6 permit exec feature fcping
rule 7 permit exec feature fctrace
rule 8 permit exec feature ips
rule 9 permit exec feature discover
rule 10 permit config feature ivr
rule 11 permit config feature ficon
rule 12 permit config feature fcip
rule 13 permit config feature in-order-guarantee
rule 14 permit config feature interface
rule 15 permit exec feature ping
rule 16 permit config feature vsan
vsan policy deny
permit vsan 10-19
What CLI command function will be permitted by the role name "guest"?
4.
An MDS 9509 director has a 16-port Fibre Channel module in slot 1 and a 32-port Fibre Channel module in slot 2. The director is assigned Domain ID 32 in FICON VSAN 27. Assume VSAN 27 is using the default value for the "fcid-last-byte" configuration command. If port 2/1 is a member of VSAN 27, what FCID is assigned to it?
5.
A physical fabric with some but not all MDS switches participating in IVR, what switch should have IVR enabled?
6.
On the Cisco Port Analyzer Adapter (PAA), what truncation mode needs to be set if an SD port is configured for 2Gb/s and the PAA's Ethernet port is configured for 1Gb to guarantee zero frame loss by the PAA?
7.
There are three different roles on MDS: Role1 allows show commands only. Role2 allows debug and configure commands, and denies show command Role 3 permits VSAN 10-30 only. User1 belongs to Role1, Role2 and
Role3. What can User1 do?
Role3. What can User1 do?
8.
A2-byte link address defined for a mainframe definitively indicates a:
9.
If all FC targets are required to be seen by iSCSI initiators, what is the easiest way to accomplish this?
10.
Fibre Channel QOS allows traffic to be prioritized in the fabric based upon: