Cisco CCIE Storage Networking Written

1.

An IT department is planning to implement an FC fabric between an MDS 9120 and a MDS 9506 with 2 Supervisors and a 32-Port switching module, utilizing 2 EISLs in a port channel. The best port configuration allowing for maximum host connectivity is:

9120, ports fc 1/1, fc 1/2 to 9506, ports fc 1/1, 1/2 9120, ports fc 1/1, fc 1/8 to 9506, ports fc 1/1, 1/5 9120, ports fc 1/2, fc 1/4 to 9506, ports fc 1/2, 1/4 9120, ports fc 1/2, fc 1/4 to 9506, ports fc 1/1, 1/2 9120, ports fc 1/2, fc 1/4 to 9506, ports fc 1/1, 1/5

2.

How is a debug and run sent to a file on an MDS?

debug (what your debugging) > logfile debugout set log debug (then run debug) debug logfile debugout (then run debug) debug can only go the screen or FTP server By default they go to a logfile

3.

What SCSI command does a target send to an initiator after the initiator sends the target a write command?

Write Ready FLOGI RSCN Transfer Ready B2B Credit Decrement

4.

What Fiber Channel transport functions can be found within the FC-2 level?

Exchange Option, Information Unit, and Sequence Session, Exchange and Information Unit Sequence, Frame and Flow Control Sequence, Frame, and Information Unit Exchange management, Link Control and Flow control

5.

FC timers E_D_TOV, R_A_TOV and D_S_TOV:

Can be set to be different for each VSAN Can be changed only for the entire switch and not VSANs Only R_A_TOV timer can be set for individual VSANS Cannot be changed Can be set only on IVR enabled switches

6.

IVR Enabled MDS Switch uses which of following to identify IVR zone members?

pwwn only fcid only pwwn and domain id pwwn and vsan id pwwn and fcid

7.

What step must be done in order to use the FCIP feature on a FICON enabled VSAN?

Set the MTU of the GIGE interface to a value greater than 1500. Bind a FICON port number to the FCIP interface FCIP and FICON are mutually exclusive features Make sure in Order Delivery is enabled under the FCIP profile None of the above

8.

On a standalone switch, VSAN 10 has 10 active ports. When a "no vsan 10" command is issued on the switch what is true?

VSAN 10 will not be deleted as it has active ports. VSAN 10 will be deleted and the ports moved to VSAN 4094. VSAN 10 will not be deleted and the ports moved to VSAN 4094 Vsan 10 is deleted and the ports moved to VSAN 4093 VSAN 10 will be deleted and the ports moved into VSAN 1

9.

Given a new switch and just powering up the system. What is the default SNMP usired and password?

admin/password root/cisco cisco/cisco admin/admin None of the above

10.

The MDS FICON portaddress "block" subcommand:

Causes the port to enter the shutdown state Causes the port to stop transmitting the OLS primitive sequence Can be applied to the CUP port Blocks data but not control traffic on the port Can be applied to a range of ports

Cisco CCIE Storage Networking Written

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco CCIE Storage Networking Written

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner