Cisco CCIE Storage Networking Written Set 8

You are connecting 2 existing independent fabrics in VSAN 2. Fabric 1 has domains 100 and 101. Fabric 2 has domains 100 and 101. All of the switches have the below interface configuration for all ports used for ISLs.
Fabric 1 has an active zoneset in VSAN 2 with one zone containing hosts Alpha, Charlie and Delta and storage devices EMC1 and Hitachi 1. Fabric 2 has no active zoneset. Why did the fabrics fail to merge? MDS9506-B1#
interface fcX/Y fcdomain rcf-reject vsan 2 switchport mode E

Before you can successfully enable the Call Home feature, which of the following must be true?

What method of load balancing is flow based?

Log messages are not showing up in fabric manager. What is the most likely the cause?

Two switches are merging together. During principal switch selection, Switch A sends a frame indicating it has an empty domain ID list. Switch B sends a frame indicating that there are previously allocated domain IDs.
Switch A has a lower priority value and a lower WWN. What should occur next?

What TCP feature reduces the chances of an oversized IP packets from being fragmented?

On the 9120 an additional lSL is required and ports1-4 and 6 are already occupied.
What additional port can be used?

A customer has existing production fabric with Brocade and McData FC switches intermixed. When adding an
MOS 9000 switch, what MDS interop mode would be required?
(Topology: McData6400 - (ISL) - Brocade12000 - (ISL) -- MDS)

SCSI LUN discovery is triggered automatically when:

What method of load balancing is flow based?