×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
Based on the following output from show hardware internal fc-mac port gbic-info module command what is the possible cause of an interface not coming up? Module-3# -----------GBIC info for user port 03-------- Present No
Module-3# sh hardware internal fc-mac port 6 gbic-info -------GBIC info for user port 06-------------- Present:Yes Tx fault:No Rx Loss: Yes Tx Enable: Yes Read State :read cc_base:passed cc_ex: passed
Module-3# sh hardware internal fc-mac port 6 gbic-info -------GBIC info for user port 06-------------- Present:Yes Tx fault:No Rx Loss: Yes Tx Enable: Yes Read State :read cc_base:passed cc_ex: passed
2.
The committee/association responsible for the production and overseeing of SCSI I/O interface standards is:
3.
When does a FCIP interface need to be configured as B-Port?
4.
LIP not capable of:
5.
The function of the SFP consists in which FC protocol layer/layers?
6.
What is the best method to view the PLOGI of a FC host to a FC target on the same MDS switch?
7.
You have a host that you connect to a switch port on a mds switch. The switch port does not come up and a 'show interface" indicates that the port is initializing and eventually goes offline. You configure the port as a TL
port and the port comes up.
What type of device is the host?
port and the port comes up.
What type of device is the host?
8.
Node is logged into port fc1/1 and fc1/1 is in VSAN 4000.If VSAN 4000 is deleted then what will happen?
9.
The Call Home feature can provide event notification and detail information on what type of automated parsing application?
10.
What command would be entered to restart VSAN 100?