Cisco CCIE Storage Networking Written Set 1

1.

There are two 2 Gbps FC links, 2Gbps ISLs port formed into a single port channel connecting two switches together. What is the initial FSPF cost and resulting FSPF cost of the port channel if ISLs failed and one of the
FC links becomes inoperable?

250:500 250:250 500:250 500:500 1000:1000

2.

What statement is NOT correct depending on the below output: MDS_switch#show iscsi virtual-target configured
Target Seagate-jbod-lun
*Port WWN 21:00.00.04:cf:db:3e:a7
Configured node
No of LU mapping:1
ISCSI LUN :0x0000,FC LUN:0X0000
No of advertised interface: 1
GigabitEthernet 2/5
No of initiators permitted: 1
Initiator 10.48.69.241/32 is permitted
All initiator permit is disabled

Interface iscsi 2/5 is in "no shut" status. Both the discovery and the target sessions exist for this iscsi connection. Iscsi target has been statically configured Only one initiator can connect to this target. Virtual target name is configured as "Seagate-jbod-lun: in the switch configuration.

3.

What statement is true?

R_RDY is used for buffer-to buffer flow control and ACK_1 frames are used to perform end-to-end flow
control. R_RDY is used for buffer-to buffer flow control and ACK_0 frames are used to perform end-to-end flowcontrol. R_RDY is used for buffer-to buffer flow control and ACK_0 and ACK_N frames are used to perform end-to-end flow control. VC_RDY is used for buffer-to buffer flow control and ACK_0 frames are used to perform end-to-end flowcontrol. Class F only uses buffer-to buffer flow control.

4.

To ensure FCID persistencyais persistent, what needs to be configured?

Static VSAN ID Static port ID Static FC_ID Static port map Static Domain ID

5.

What parameter does not need to be compatible for a port-channel to come up between 2 switches?

Trunk mode Speed Port VSAN Port allowed VSAN list Port set to (PC) or port-channel mode

6.

A fabric Zone Merge Failure between fabric A and fabric B will result if:

The active zoneset in both fabric A and fabric B is an exact match before the merge it attempted. The active zoneset in fabric A has more zones than the active zoneset in fabric B. A zone in fabric A contains 3 members, while the same zone name in fabric B contains 4 members. Zone names used in fabric A are 10 characters, while the zone names in fabric B contain less than 10characters. None of the above.

7.

While in configuration mode, what command will allow a user to view interface 4 on module 2 without leaving the current mode?

"exit" then "port show 4 module 2" "do show interface 2/4 "session show interface 2/4" "show mod 2 int 4" None of the above - It is not possible to show the interface without ending configuration mode.

8.

What is true about MDS FCIP Profiles?

The Profile Ids must match the FCIP interface ID. Only one FCIP interface per profile. FCIP profile contains the assigned IP interface for which it is bound to. FCIP profile is not required if only one FCIP interface is used. FCIP Profile is assigned to a GIGE interface.

9.

How can ISCSI protocol health and status can be best determined?

Span the ISCSI interface and use PAA to view ISCSI PDU. Use the Monitor function of the Device manager. Attach to IPS module and do From CLI enable prompt do From CLI enable prompt do

10.

What command can be used to find the first available FICON port number to bind to a newly created port- channel on an MDS 9120 switch?

Show port-channel database Show ficon next-available port-number Show ficon first-available port-number It is not possible to configure FICON on the MDS 9120 switch. Port-channel carrying FICON VSANs are not bound to a FICON port number the physical links making upthe port-channel already have FICON port numbers.

Cisco CCIE Storage Networking Written Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco CCIE Storage Networking Written Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner